Son, JY Saveljiev, VV Choi, YJ Bahn, JE Kim, SK Choi, HH 2024-01-21T08:05:43Z 2024-01-21T08:05:43Z 2021-09-03 2003-11 0091-3286 https://pubs.kist.re.kr/handle/201004/138131 In designing an autostereoscopic imaging system based on either a lenticular, parallax barrier, or integral photography (IP) plate, geometrical parameters relating the viewing zone and image display panel combined with the plate are the first things to be determined for the system. To define parameters such as the size of the panel, multiview image arrangement, pitch and focal length of the plate, viewing zone distance from the panel, and others, an optical configuration composed of an image mask aligned in front of a point light source array is used. With this configuration, the geometrical parameters are calculated and their relationships are found. In addition, the concept of pixel cells is introduced to arrange multiview images in the display panel for full parallax image generation. (C) 2003 Society of Photo-Optical Instrumentation Engineers. English SPIE-INT SOCIETY OPTICAL ENGINEERING Parameters for designing autostereoscopic imaging systems based on lenticular, parallax barrier, and integral photography plates Article 10.1117/1.1615259 1 OPTICAL ENGINEERING, v.42, no.11, pp.3326 - 3333 OPTICAL ENGINEERING 42 11 3326 3333 scie scopus 000186721600040 2-s2.0-0347063786 Optics Optics Article; Proceedings Paper full parallax image pixel cell viewing zone point light source array optical plates image mask multiview image