Kim, TH Sung, HK Choi, JW Yoon, KH 2024-01-21T09:08:26Z 2024-01-21T09:08:26Z 2021-09-03 2003-04 1225-6463 https://pubs.kist.re.kr/handle/201004/138716 This paper describes an effective method for forming silicon oxide on silica-on-silicon platforms, which results in excellent characteristics for hybrid integration. Among the many processes involved in fabricating silica-on-silicon platforms with planar lightwave circuits (PLCs), the process for forming silicon oxide on an etched silicon substrate is very important for obtaining transparent silica film because it determines the compatibility at the interface between the silicon and the silica film. To investigate the effects of the formation process of the silicon oxide on the characteristics of the silica PLC platform, we compared two silicon oxide formation processes: thermal oxidation and plasma-enhanced chemical vapor deposition (PECVD). Thermal oxidation in fabricating silica platforms generates defects and a cristobalite crystal phase, which results in deterioration of the optical waveguide characteristics. On the other hand, a silica platform with the silicon oxide layer deposited by PECVD has a transparent planar optical waveguide because the crystal growth of the silica has been suppressed. We confirm that the PECVD method is an effective process for silicon oxide formation for a silica platform with excellent characteristics. English WILEY WAVE-GUIDE PLC PLATFORM MODULE Effective silicon oxide formation on silica-on-silicon platforms for optical hybrid integration Article 10.4218/etrij.03.0102.0208 1 ETRI JOURNAL, v.25, no.2, pp.73 - 80 ETRI JOURNAL 25 2 73 80 scie scopus kci ART000877569 000182224200003 2-s2.0-0038370185 Engineering, Electrical & Electronic Telecommunications Engineering Telecommunications Article WAVE-GUIDE PLC PLATFORM MODULE