Seo, Y Kim, J Kim, HJ 2024-01-21T09:40:58Z 2024-01-21T09:40:58Z 2021-09-01 2002-12 0032-3888 https://pubs.kist.re.kr/handle/201004/139038 The effect of a compatibilizer (poly(ester imide), PEsI) on the biaxial deformation of a thermotropic liquid crystalline polymer (TLCP, poly(ester amide)) in a poly(ether imide) and the properties of biaxially deformed in situ composites were studied. The compatibilizer improved dispersion of the TLCP and the adhesion between TLCP and the matrix. The properties of blown films were affected by the amount of the compatibilizer used. The morphology evidently shows that ca. 0.6 wt% PEsI provides the best morphology when 10 wt% VB phase is included. The mechanical properties, especially in the hoop direction, were significantly improved for the compatibilized films compared to uncompatibilized one. The impact strength of a compatibilized blend film with 0.6 wt% PEsI was almost twice that of an uncompatibilized blend film. English SOC PLASTICS ENG INC LIQUID-CRYSTALLINE POLYMER TLCP TERNARY BLENDS FUNCTIONALIZED POLYPROPYLENE MECHANICAL-PROPERTIES THERMOPLASTIC ELASTOMER POLY(ESTER AMIDE) MORPHOLOGY FLOW BEHAVIOR NYLON-6 Effect of the compatibilizer on the physical properties of biaxially deformed in situ composites Article 10.1002/pen.11126 1 POLYMER ENGINEERING AND SCIENCE, v.42, no.12, pp.2401 - 2411 POLYMER ENGINEERING AND SCIENCE 42 12 2401 2411 scie scopus 000180209400011 2-s2.0-0036947262 Engineering, Chemical Polymer Science Engineering Polymer Science Article LIQUID-CRYSTALLINE POLYMER TLCP TERNARY BLENDS FUNCTIONALIZED POLYPROPYLENE MECHANICAL-PROPERTIES THERMOPLASTIC ELASTOMER POLY(ESTER AMIDE) MORPHOLOGY FLOW BEHAVIOR NYLON-6 in situ composites thermotropic liquid crystalline polymer compatibilizer blown film nano composites