Oh, SY Yoo, DI Shin, Y Lee, WS Jo, SM 2024-01-21T11:03:53Z 2024-01-21T11:03:53Z 2022-01-10 2002-03 1229-9197 https://pubs.kist.re.kr/handle/201004/139725 Cellulose carbonate was prepared by the reaction of cellulose pulp and CO(2) with treatment reagents, such as aqueous. ZnCl(2) (20-40 wt%) solution, acetone or ethyl acetate, at -5-0degreesC and 30-40 bar (CO(2)) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-0degreesC. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at 20degreesC according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-5degreesC and atmospheric pressure). English KOREAN FIBER SOC Preparation of regenerated cellulose fiber via carbonation. I. Carbonation and dissolution in an aqueous NaOH solution Article 10.1007/BF02875361 1 FIBERS AND POLYMERS, v.3, no.1, pp.1 - 7 FIBERS AND POLYMERS 3 1 1 7 scie scopus 000182367500001 2-s2.0-13244250584 Materials Science, Textiles Polymer Science Materials Science Polymer Science Article cellulose carbonate CO(2) sodium hydroxide solution solubility phase diagram