Kim, KB Kim, SH Kim, WT Kim, DH Hong, KT 2024-01-21T12:15:09Z 2024-01-21T12:15:09Z 2021-09-05 2001-05-31 0921-5093 https://pubs.kist.re.kr/handle/201004/140471 Structural evolution during mechanical alloying and subsequent heat treatment of Al65Cu20Fe15 and Al65Cu20Fe10Si5 was studied by X-ray diffractometry (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The Al65Cu20Fe15 and Al65Cu20Fe10Si5 powders milled for 10 h hewed a layered structure consisting of Al-. Cu- and Fe-rich lavers. DSC traces obtained from the powder during heating, up to 600 degreesC, showed two exothermic peaks with peak temperatures of 330 and 440 degreesC in Al65Cu20Fe15 and 330 and 500 degreesC in Al65Cu20Fe10Si5 powders. The lower exothermic peaks correspond to the formation of Al2Cu and Al7Cu2Fe phases from the layered structure. The second high temperature exotherms correspond to the formation of Al(Fe,Cu) and 1/1 cubic approximant in the Al65Cu20Fe15 powder and to the formation of Al13Fe9 and 1/1 cubic approximant in the Al65Cu20Fe10Si5 powder. The Al65Cu20Fe15 and Al65Cu20Fe10Si5 powders annealed for 5 h st 750 degreesC showed microstructure consisting of Al(Cu,Fe) and Al13Fe4 phases, and Al13Fe4, icosahsdral and new approximant phases, respectively. The partial substitution of Fe by Si increased the stability of tire 1/1 cubic approximant and icosahedral phases. (C) 2001 Published by Elsevier Science B.V. English ELSEVIER SCIENCE SA CU-FE ALLOYS QUASI-CRYSTALS APPROXIMANT STRUCTURES ICOSAHEDRAL PHASE QUASICRYSTALS SYSTEM Structural evolution during heat treatment of mechanically alloyed Al-Cu-Fe-(Si) alloys Article 10.1016/S0921-5093(00)01584-7 1 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.304, pp.822 - 829 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 304 822 829 scie scopus 000168457100160 2-s2.0-0035978586 Nanoscience & Nanotechnology Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Science & Technology - Other Topics Materials Science Metallurgy & Metallurgical Engineering Article; Proceedings Paper CU-FE ALLOYS QUASI-CRYSTALS APPROXIMANT STRUCTURES ICOSAHEDRAL PHASE QUASICRYSTALS SYSTEM icosahedral phase approximant mechanical alloying heat treatment Al-Cu-Fr