Suh, JY Byun, JS Shim, JH Oh, YJ Cho, YW Shim, JD Lee, DN 2024-01-21T13:12:49Z 2024-01-21T13:12:49Z 2021-09-05 2000-11 0267-0836 https://pubs.kist.re.kr/handle/201004/140973 Different microstructures having acicular ferrite as the major phase but with various types and amounts of microphases were obtained by applying different cooling processes to C-Mn steels containing fine non-metallic inclusions. Optical and electron microscopy were carried out to identify the various microphases in the acicular ferrite microstructure, and their mechanical properties were measured and compared to study the effect of the microphases on the microstructure - properties relationship in C - Mn wrought steels. The existence and increase of the fraction of small isolated martensite between the acicular ferrite laths were found to play an important role in determining the tensile strength and low temperature impact toughness of the steels. However, the elongation and room temperature impact toughness were rather insensitive to the microphases. This may be attributed to the uniform distribution and isolation of relatively small martensite due to the fine interlocking character of the acicular ferrite microstructure. MST/4774. English I O M COMMUNICATIONS LTD INST MATERIALS Acicular ferrite microstructure in titanium bearing low carbon steels Article 10.1179/026708300101507514 1 MATERIALS SCIENCE AND TECHNOLOGY, v.16, no.11-12, pp.1277 - 1281 MATERIALS SCIENCE AND TECHNOLOGY 16 11-12 1277 1281 N scie scopus 000166354100011 2-s2.0-0000120593 Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Materials Science Metallurgy & Metallurgical Engineering Article; Proceedings Paper HEAT-AFFECTED ZONE ARC WELD METAL INTRAGRANULAR FERRITE TOUGHNESS acicular ferrite microphase mechanical property