Choe, S Chang, YY Hwang, KY Khim, J 2024-01-21T13:33:08Z 2024-01-21T13:33:08Z 2021-09-04 2000-10 0045-6535 https://pubs.kist.re.kr/handle/201004/141081 Zero-valent iron powder (Fe-0) has been determined to be potentially useful for the removal of nitrate in the water environment. This research is aimed at subjecting the kinetics of denitrification by nanoscale Fe-0 to an analysis of factors affecting the chemical denitrification of nitrate, Nanoscale iron particles with a diameter in the range of 1-100 nm, which are characterized by the large BET specific surface area to mass ratio (31.4 m(2)/g), removed mostly 50, 100, 200, and 400 mg/l of nitrate within a period of 30 min with little intermediates. Compared with microscale (75-150 mu m) Fe-0, endproduct is not ammonia but N-2 gas. Kinetics analysis from batch studies revealed that the denitrification reaction with nanoscale Fe-0 appeared to be a pseudo first-order with respect to substrate and the observed reaction rate constant (k(obs)) varied with iron content at a relatively low degree of application. The effects of mixing intensity (rpm) on the denitrification rate suggest that the denitrification appears to be coupled with oxidative dissolution of iron through a largely mass transport-limited surface reaction (<40 rpm). (C) 2000 Elsevier Science Ltd. All rights reserved. English PERGAMON-ELSEVIER SCIENCE LTD Kinetics of reductive denitrification by nanoscale zero-valent iron Article 10.1016/S0045-6535(99)00506-8 1 CHEMOSPHERE, v.41, no.8, pp.1307 - 1311 CHEMOSPHERE 41 8 1307 1311 N scie scopus 000087893200028 2-s2.0-0033934410 Environmental Sciences Environmental Sciences & Ecology Article denitrification nanoscale Fe-0 pseudo first-order iron content mixing intensity