Bae, SY Shin, KH Jeong, JY Kim, JG 2024-01-21T14:05:12Z 2024-01-21T14:05:12Z 2021-09-05 2000-05-01 0021-8979 https://pubs.kist.re.kr/handle/201004/141386 The feasibility of chemically ordered, ultrathin FePt longitudinal media for ultrahigh recording density is discussed with the basic magnetic and structural properties which can be obtained under acceptable thin film processing condition, as well as preliminary read/write test. High coercivity (>>3000 Oe) could be achieved even in the film with very low M-rt (<<0.3 memu/cm(2)) at moderate annealing temperature (375-450 degrees C). However, rapid degradation of crystallographic texture with thickness, in the absence of proper template layer, results in very low coercivity squareness (S*similar to 0.2), which may be detrimental to recording application. Media noise, particularly exchange coupling induced transition noise, may not be a critical problem, by virtue of extremely small grain size (similar or equal to 5 nm) and high K-u. (C) 2000 American Institute of Physics. [S0021- 8979(00)46708-3]. English AMER INST PHYSICS THIN-FILMS Feasibility of FePt longitudinal recording media for ultrahigh density recording Article 10.1063/1.372897 1 JOURNAL OF APPLIED PHYSICS, v.87, no.9, pp.6953 - 6955 JOURNAL OF APPLIED PHYSICS 87 9 6953 6955 scie scopus 000086728800347 2-s2.0-0001644270 Physics, Applied Physics Article; Proceedings Paper THIN-FILMS magnetic recording media