Kim, H.-J. Park, Y.K. Kim, S.-I. Kim, E.K. Kim, T.-W. 2024-01-21T14:44:30Z 2024-01-21T14:44:30Z 2021-09-02 1999-12 0374-4884 https://pubs.kist.re.kr/handle/201004/141827 Optimal conditions of the thickness and doping concentration for AlGaAs/GaAs heteroface solar cell were calculated. Our result shows that the dependence of efficiency on the thickness and doping concentration of emitter is higher than that of base. The optimum conditions of the thickness and doping concentration of the emitter are 600 nm and 4.0×10 17 cm -3, respectively. Using the calculated optimum conditions, the solar cells were fabricated by atmospheric pressure metalorganic chemical vapor deposition. The size of the solar cell was 1 cm × 1 cm. When the power of the incident light was 86 mW/cm 2, the measured open-circuit voltage, short-circuit current, and fill factor were 0.79 V, 23.1 mA/cm 2, and 0.64, respectively, and the measured efficiency was 13.7 %. English Fabrication of AlGaAs/GaAs heteroface solar cells Article 1 Journal of the Korean Physical Society, v.34, no.SUPPL. 3, pp.S435 - S438 Journal of the Korean Physical Society 34 SUPPL. 3 S435 S438 N scopus 2-s2.0-0033453335 Article GaAs heteroface quantum efficiency solar cell