Kong, H Han, HG Yoon, ES Kwon, OK Myshkin, NK 2024-01-21T17:15:02Z 2024-01-21T17:15:02Z 2021-09-04 1998-03 0043-1648 https://pubs.kist.re.kr/handle/201004/143218 The tribological behavior of MoS2-bonded-films was evaluated by the international standard testing methods, such as ASTM D 2625 and ASTM D 2714. Test results showed that friction and wear performance differed significantly with the contact configuration of tribe-tester, In order to investigate the effect of the test contact configurations on wear life, surface temperatures were measured and evaluated analytically in terms of a frictional heating analysis according to the contact geometry of two test standard methods. Ring-on-block tests in modified test conditions of ASTM D 2625 were also performed. The test results showed that the wear life of MoS2-bonded-films was affected significantly not only by the frictional heating and contact pressure, but also by the contact conformity of the test specimens. (C) 1998 Elsevier Science S.A. English ELSEVIER SCIENCE SA Evaluation of the wear life of MoS2-bonded-films in tribo-testers with different contact configuration Article 10.1016/S0043-1648(97)00288-3 1 WEAR, v.215, no.1-2, pp.25 - 33 WEAR 215 1-2 25 33 scie scopus 000072655800004 2-s2.0-0032029290 Engineering, Mechanical Materials Science, Multidisciplinary Engineering Materials Science Article friction wear wear life frictional heating MoS2-bonded-film ring-on-block tester pin and V-block test