Seo, DY Bieler, TR An, SU Larsen, DE 2024-01-21T17:40:13Z 2024-01-21T17:40:13Z 2021-09-05 1998-01 1073-5623 https://pubs.kist.re.kr/handle/201004/143406 Cast gamma titanium aluminides are gaining acceptance as potential replacements for superalloy and steel components in many applications. One particular alloy with W, Mo, and Si additions has shown exceptional primary creep resistance. Quantitative microscopic comparisons were made between microstructures in undeformed and deformed regions in creep specimens deformed to strains between 0.1 and 1.5 pet strain, using optical microscope, scanning electron microscope (SEM), and transmission electron microscope (TEM) techniques. As-hot isostatically pressed ("hipped") and heat-treated (1010 degrees C for 50 hours) conditions were compared. The as-hipped specimen had a higher lamellar volume fraction, and it crept more than 100 times faster. The lamellar spacing in the lamellar grains systematically decreased by 15 to 35 pet, with increasing stress, during the first 0.1 to 2 pct strain. Precipitates containing W, Mo, and/or Si were observed in the deformed gage and undeformed grip sections of the heat-treated specimens. Precipitation is nucleated by heat treatment, but, during creep deformation, a more homogeneous and faster growth process occurs in the gage section than in the aged but undeformed grip section. The gage section had a 35 pet higher precipitate volume fraction, but their average size was smaller. A lower volume fraction of lamellar grains and the presence of precipitates account for the excellent creep resistance in the heat-treated alloy. English MINERALS METALS MATERIALS SOC TI-AL ALLOYS GAMMA-TITANIUM ALUMINIDE INTERMETALLIC COMPOUND OXIDATION RESISTANCE DEFORMATION FRACTURE PROPAGATION ADDITIONS CR Changes in microstructure during primary creep of a Ti-47Al-2Nb-1Mn-0.5W-0.5Mo-0.2Si alloy Article 10.1007/s11661-998-0161-7 1 METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.29, no.1, pp.89 - 98 METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 29 1 89 98 scie scopus 000071748800009 2-s2.0-0031678477 Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Materials Science Metallurgy & Metallurgical Engineering Article; Proceedings Paper TI-AL ALLOYS GAMMA-TITANIUM ALUMINIDE INTERMETALLIC COMPOUND OXIDATION RESISTANCE DEFORMATION FRACTURE PROPAGATION ADDITIONS CR