Lee, JC Byun, JY Oh, CS Seok, HK Lee, HI 2024-01-21T17:45:28Z 2024-01-21T17:45:28Z 2021-09-04 1997-12 1359-6454 https://pubs.kist.re.kr/handle/201004/143496 SiCp/2024 Al composites were prepared using various processing techniques, such as spray forming, powder metallurgical hot pressing, thixoforming, and compocasting. The interfacial characterizations of these composites were performed using scanning electron microscopy, Auger electron spectrometry, transmission electron microscopy, and X-ray diffraction on reaction products extracted using the electrochemical dissolution. The value of these combined techniques in elucidating the morphologies of the interfacial reaction products was also demonstrated. The influence that each fabrication process has on the extent of the interfacial reaction was studied. Adequate process parameters to fabricate SiCp/Al alloy composites were proposed based on thermodynamic considerations. (C) 1997 Acta Metallurgica Inc. English PERGAMON-ELSEVIER SCIENCE LTD SILICON-CARBIDE ALUMINUM ALLOYS SYSTEM Effect of various processing methods on the interfacial reactions in SiCp 2024 Al composites Article 10.1016/S1359-6454(97)84851-3 1 ACTA MATERIALIA, v.45, no.12, pp.5303 - 5315 ACTA MATERIALIA 45 12 5303 5315 scie scopus A1997YJ67000042 2-s2.0-0031356099 Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Materials Science Metallurgy & Metallurgical Engineering Article SILICON-CARBIDE ALUMINUM ALLOYS SYSTEM composite