Kim, SR Kim, SH 2024-01-21T18:08:10Z 2024-01-21T18:08:10Z 2021-09-01 1997-08-01 0925-8388 https://pubs.kist.re.kr/handle/201004/143653 The magnetic and magnetostrictive properties of melt-spun ribbons of (Sm0.33Fe0.67)(1-x)B-x (where n = 0, 0.01, 0.02, 0.03 and 0.04) alloys are investigated as a function of wheel speed during melt-quenching using a single-roll technique. Contrary to the previous results on Dy-Fe and Tb-Fe based systems, the magnetostrictive characteristics seem to vary in a rather unexpected way, although the grain size decreases with wheel speed and an amorphous phase is formed at high wheel speeds and/or at high B contents, as expected. This is mainly because, for the alloys with x less than or equal to 0.02, the absolute value of magnetostriction is exceptionally large for the ribbons fabricated at the wheel speed of 10 m s(-1) (and also 20 m s(-1) for the B-free alloy). The magnitude of magnetostriction of the present melt-spun Sm-Fe-B alloy ribbons is found to be small and also the sensitivity of magnetostriction is poor at low magnetic fields except for high wheel speeds and high B contents. The coercive force is observed to be well matched with the sensitivity of magnetostriction at low fields; good (poor) sensitivity is attained at low (high) Hc. Saturation magnetization does not vary with B content and is 66.2 emu g(-1) (at x = 0.04 and 50 ms(-1)). (C) 1997 Elsevier Science S.A. English ELSEVIER SCIENCE SA LAUSANNE Magnetostriction of rapidly quenched Sm-Fe-B alloys Article 10.1016/S0925-8388(97)00056-X 1 JOURNAL OF ALLOYS AND COMPOUNDS, v.258, no.1-2, pp.163 - 168 JOURNAL OF ALLOYS AND COMPOUNDS 258 1-2 163 168 scie scopus A1997XW59600032 2-s2.0-0031208332 Chemistry, Physical Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Chemistry Materials Science Metallurgy & Metallurgical Engineering Article; Proceedings Paper SmFe2 compound B addition giant magnetostriction rapid quenching amorphous structure