Lee, SY Soh, BJ Ahn, JW Cho, JY Park, BH Jung, CS Fedorov, VB Denisov, AG Kim, YH Hahn, TS Choi, SS Oh, B Moon, SH 2024-01-21T18:14:55Z 2024-01-21T18:14:55Z 2022-01-10 1997-06 1051-8223 https://pubs.kist.re.kr/handle/201004/143767 An analysis of the axially symmetric TM011 mode in a dielectric-loaded cavity is presented and a technique of using a TM011 mode dielectric-loaded cavity is introduced for measurments of microwave surface resistances of HTS thin films. A dielectric resonator with epsilon(r) approximate to 39 is used for this purpose. It turned out that Q of the TM011 mode dielectric-loaded cavity is very sensitive to the surface resistance of the material at the bottom plate, especially to the surface resistance of the area under the dielectric resonator, which can be used to investigate local microwave properties of large HTS thin films in a nondestructive, simple way. Experiments on YBCO thin films with the dimensions of similar to 2 x 2 cm(2) are performed using this technique, which revealed inhomogeneity in the microwave surface resistance of the thin films at different sites and demonstrated the usefulness of this technique. English IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC RESONATOR TECHNIQUE TEMPERATURE Use of a dielectric-loaded cylindrical cavity in measurements of the microwave surface resistances of high-T-c superconducting thin films Article 1 IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, v.7, no.2, pp.2013 - 2017 IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 7 2 2013 2017 scie scopus A1997XH86600222 2-s2.0-0031163391 Engineering, Electrical & Electronic Physics, Applied Engineering Physics Article; Proceedings Paper RESONATOR TECHNIQUE TEMPERATURE high-Tc superconductors thin films microwave surface resistance dielectric loaded cylindrical cavity