Seo, Y 2024-01-21T18:33:12Z 2024-01-21T18:33:12Z 2021-09-01 1997-04-11 0021-8995 https://pubs.kist.re.kr/handle/201004/143845 A new method was sought to produce in situ composites by the addition of a third component that would react with matrix polymers and thermotropic liquid crystal polymers to form graft copolymers, which act as a compatibilizer at the interface. Morphological observation reveals the significance of compatibilization in immiscible polymer blends. Good adhesion at the interface by the produced compatibilizer enabled the finely dispersed liquid crystal phase to be deformed in shear flow without elongation, even when the viscosity of the matrix polymer was lower than that of the liquid crystal polymer. This study provides a way to produce a strong and tough in situ composite. (C) 1997 John Wiley & Sons, Inc. English JOHN WILEY & SONS INC SITU COMPOSITE SYSTEM MECHANICAL-PROPERTIES POLY(ETHER IMIDE) POLYPROPYLENE MORPHOLOGY FLOW Interfacial adhesion and deformation of thermotropic liquid crystal polymers in engineering thermoplastics: Blends of a poly(ester amide) with nylon 6 and a polyester with PBT Article 10.1002/(SICI)1097-4628(19970411)64:2<359::AID-APP17>3.3.CO;2-# 1 JOURNAL OF APPLIED POLYMER SCIENCE, v.64, no.2, pp.359 - 366 JOURNAL OF APPLIED POLYMER SCIENCE 64 2 359 366 scie scopus A1997WP83800017 2-s2.0-85087249622 Polymer Science Polymer Science Article SITU COMPOSITE SYSTEM MECHANICAL-PROPERTIES POLY(ETHER IMIDE) POLYPROPYLENE MORPHOLOGY FLOW in situ composite preparation interfacial adhesion reactive extrusion TLCP droplet deformation