Yoon, SJ Yoo, SY Moon, JH Jung, HJ Kim, HJ 2024-01-21T19:41:47Z 2024-01-21T19:41:47Z 2021-09-05 1996-02 0884-2914 https://pubs.kist.re.kr/handle/201004/144548 The effects of the addition of La2O3 (0.1 wt. %-1 wt. %) and MnO2 (0.1 wt. %-1 wt. %) on the piezoelectric properties of the 0.02Pb(Y2/3W1/3)O-3-0.98Pb(Zr0.52Ti0.48)O-3 system were investigated to develop the composition available for an actuator. In the case of the addition of La2O3 to the system, the maximum values of d(33) and k(p) were observed in the 0.1 wt. % La2O3, and the values of Q(m) did not change with the amount of La2O3. The values of d(33), k(p), and Q(m) were 428 x 10(-12) C/N, 57%, and 71, respectively. On the other hand, the introduction of 0.5 wt. % MnO2 as an acceptor into the system resulted in the maximum Q(m) value of 741, exhibiting a d(33) of 298 x 10(-12) C/N, and a k(p) of 50%. In the case of the simultaneous addition of La2O3 and MnO2, the best piezoelectric properties are obtained from the composition of 0.02Pb(Y2/3W1/3)O-3-0.98Pb(Zr0.52Ti0.48)O-3 + 0.1 Wt. % La2O3 + 0.3 wt. % MnO2. The values of d(33), k(p), and Q(m) were 345 x 10(-12) C/N, 55%, and 741, respectively. English MATERIALS RESEARCH SOCIETY Effects of La2O3 and MnO2 on the piezoelectric properties of Pb-0.02(Y2/3W1/3)O-3-0.98Pb(Zr0.52Ti0.48)O-3 Article 10.1557/JMR.1996.0041 1 JOURNAL OF MATERIALS RESEARCH, v.11, no.2, pp.348 - 352 JOURNAL OF MATERIALS RESEARCH 11 2 348 352 scie scopus A1996TU51600011 2-s2.0-0030084578 Materials Science, Multidisciplinary Materials Science Article piezoelectric properties complex perovskite softner hardner