Lee, H.Y. Oh, J.K. Lee, D.H. 2024-01-22T00:16:25Z 2024-01-22T00:16:25Z 2021-09-02 1990-06 0360-2141 https://pubs.kist.re.kr/handle/201004/147101 The purification of tin by a zone refining method has been examined both theoretically and experimentally. A model capable of simulating the characteristics of zone refining was proposed by taking account of the solute transport resistance in the melt. The effective distribution coefficient could be expressed in terms of the parameter D/v, zone length, and the equilibrium distribution coefficient. It appears that for large values of the zone travel rate and zone length, zone refining does not result in satisfactory purification even by repeated-pass methods. Experimental results indicated that the concentration distribution of lead and bismuth was in good agreement with that estimated by the proposed model. Diffusivities of lead and bismuth in the tin melt at a slightly higher temperature than the melting point, 505 K, could be estimated to be 4.5 × 10-5 cm-5/s and 5.5 × 10-5 cm2/s, respectively. Such large values should be substantially ascribed to enhancement of solute transport due to natural convection. ？ 1990 The Minerals, Metals & Material Society. English Springer-Verlag Metallography--Diffusion Tin and Alloys--Purification Partial-Solidification Refining Zone Refining Tin Refining Purification of tin by zone refining with development of a new model Article 10.1007/BF02667857 1 Metallurgical Transactions B, v.21, no.3, pp.455 - 461 Metallurgical Transactions B 21 3 455 461 scopus 2-s2.0-0025444462 Article Metallography--Diffusion Tin and Alloys--Purification Partial-Solidification Refining Zone Refining Tin Refining tin melt at low temperature zone refining new model high purification distribution coefficient zone travel rate zone length