Kim, Dae Kyung Geunhyeok Choi Ko, Tae-Jun Shin, Seungwon Kim, Seong Jin 2024-01-12T03:32:11Z 2024-01-12T03:32:11Z 2022-03-25 2022-03 0001-5970 https://pubs.kist.re.kr/handle/201004/76780 The oil-water separation plays a vital role in many engineering applications and environmental issues, which can be achieved using an oleophobic mesh that restricts the oil spreading along the mesh surface. However, unfortunately, the oil-water flow within a mesh hole could not be experimentally investigated due to the technical difficulty of observing the motion of the oil-water interface inside the mesh hole. In the present work, we use direct numerical simulation based on the level contour reconstruction method to investigate the two-phase oil-water flow through a mesh hole. Numerical solutions on two distinctive oleophilic and oleophobic surfaces are representatively compared in detail to elucidate the role of oleophobicity in oil-water separation under different external pressure gradients. Our numerical solutions indicate that the oil inertia through the mesh hole can pose a severe threat to the oil-water separation performance by forcing the contact line to spread even on a highly oleophobic surface. This inertial effect is found to be minimised by narrowing the mesh hole size. According to the numerical solutions, the narrowed hole improves not only the interfacial resistance but also the viscous dissipation that contributes to the resistance to oil penetration by dissipating the oil inertia. The effect of viscous dissipation is then discussed in terms of the regime map of oil penetration depth for various oleophobicities and external pressure gradients for two different hole sizes. English Springer Verlag Numerical investigation of oil-water separation on a mesh-type filter Article 10.1007/s00707-022-03155-0 1 Acta Mechanica, v.233, no.3, pp.1041 - 1059 Acta Mechanica 233 3 1041 1059 N scie scopus 000760704200001 Mechanics Mechanics Article OIL/WATER SEPARATION FRONT-TRACKING MULTIPHASE FLOWS BOUNDARY SLIP SIMULATION FLUID COMPLEX VOLUME FIELD LEVEL-SET METHOD