Kim, S.Y. Kang, B.H. Jaluria, Y. 2024-01-12T11:12:42Z 2024-01-12T11:12:42Z 2022-03-07 1997-01 0272-5673 https://pubs.kist.re.kr/handle/201004/85546 The characteristics of the pulsating flow and the associated thermal transport from two heated blocks, representing energy dissipating electronic components with different heights, in a channel have been numerically investigated. At the channel inlet, a pulsating sinusoidal flow Ui is imposed at a uniform temperature TC. The block surfaces in the channel are taken at a constant higher temperature TH The channel walls are assumed to be adiabatic. Results on the time-dependent flow and temperature field are obtained and averaged over a cycle of pulsation. The effect of the important governing parameters, such as the Strouhal number S and the dimensionless heights of the blocks, on the heat transfer rate is investigated in detail. The results indicate that the recirculation flow behind the downstream block, as well as that in the inter-block region, are substantially affected by the frequency and the heights of the blocks. These, in turn, have a strong influence on the thermal transport from the heated elements to the pulsating flow. The present results are also compared with those obtained earlier for a steady non-pulsating flow, and the effect of pulsation on the overall transport process is determined. The relevance of these results to the cooling of electronic systems is discussed. English American Society of Mechanical Engineers Thermal interaction between isolated heated electronic components in pulsating channel flow Conference 1 32nd National Heat Transfer Conference, pp.57 - 66 32nd National Heat Transfer Conference 57 66 US Baltimore 1997-08-08 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD 2-s2.0-4043065203