Lee, H.K. Yang, G.E. Ryuh, B.S. Park, S.H. 2024-01-12T11:38:37Z 2024-01-12T11:38:37Z 2022-03-07 1996-08 0000-0000 https://pubs.kist.re.kr/handle/201004/85908 The optimal tool path for NC milling of a sculptured surface is given on cross sections of the surface, which extends the application of contour tool path from 2 dimensional milling to 3-axis and 5-axis milling. The cutting speed in rough cutting is the main objective of the optimal path. The contour tool path on cross sections of the surface can generate the rough cutting path in high speed without excessive cutting force, chatter and heavy wear of the cutting tool. Also, the path can be expanded to 3 -axis and 5-axis milling for machining of complicated surfaces. ？ 1996 American Society of Mechanical Engineers (ASME). All rights reserved. English American Society of Mechanical Engineers (ASME) Optimal rough cutting tool path on cross sections of sculptured surface Conference 10.1115/96-DETC/DAC-1071 1 ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference, DETC-CIE 1996 ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference, DETC-CIE 1996 US Irvine, California 1996-08-18 Proceedings of the ASME Design Engineering Technical Conference 2-s2.0-85101973205