Low-temperature co-sintering technique for the fabrication of multi-layer functional ceramics for solid oxide fuel cells

Abstract

The low-temperature co-sintering technique for the fabrication of the multi-layered electrolyte supported on a planar anode substrate is demonstrated for solid oxide fuel cells (SOFCs). A NiO/gadoliniadoped ceria (GDC) anode substrate is fabricated using tape casting and lamination processes, and yttria-stabilized zirconia (YSZ) bottom electrolyte and GDC top electrolyte layers are sequentially screen printed, followed by co-sintering at 1230 degrees C. The electrolyte layers are successfully densified at an extremely low processing temperature by promoting the sinterability of the individual components, and a continuously graded electrolyte structure is constructed to suppress the delamination of the electrolyte films. Based on the camber analysis, the cell structure is optimized to minimize the structural distortion and eliminate the processing defects. The low-temperature co-sintering technique presented in this study is expected to widen the material selection and resolve the compatibility issues associated with high-temperature processing for the fabrication of SOFCs. (C) 2015 Elsevier Ltd. All rights reserved.