DSpace at KISTKIST Article2010

Full metadata record

DC Field Value Language
dc.contributor.authorKang, Hyun-Su-
dc.contributor.authorDoh, Jung-Mann-
dc.contributor.authorHong, Kyung-Tae-
dc.contributor.authorKo, In-Yong-
dc.contributor.authorShon, In-Jin-
dc.date.accessioned2024-01-20T18:30:52Z-
dc.date.available2024-01-20T18:30:52Z-
dc.date.created2021-09-01-
dc.date.issued2010-11-
dc.identifier.issn1738-8228-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/130989-
dc.description.abstractExtremely dense WC with a relative density of up to 99% was obtained within five minutes under a pressure of 80 MPa using the High Frequency Induction Heated Sintering method The average grain size of the WC was about 71 nm The advantage of this process is not only rapid densification to obtain a neartheoretical density but also the prohibition of grain growth in nano structured materials The hardness and fracture toughness of the dense WC produced by HFIHS were 2660 kg mm(-2) and 7 2 MPa na(1/2), respectively-
dc.languageKorean-
dc.publisherKOREAN INST METALS MATERIALS-
dc.subjectULTRA-FINE WC-
dc.subjectHARD MATERIALS-
dc.subjectMICROSTRUCTURES-
dc.subjectCONSOLIDATION-
dc.titleRapid Sintering of Nanostuctured Tungsten Carbide by High-Frequency Induction Heating and its Mechanical Properties-
dc.typeArticle-
dc.identifier.doi10.3365/KJMM.2010.48.11.1009-
dc.description.journalClass1-
dc.identifier.bibliographicCitationKOREAN JOURNAL OF METALS AND MATERIALS, v.48, no.11, pp.1009 - 1013-
dc.citation.titleKOREAN JOURNAL OF METALS AND MATERIALS-
dc.citation.volume48-
dc.citation.number11-
dc.citation.startPage1009-
dc.citation.endPage1013-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.description.journalRegisteredClasskci-
dc.identifier.kciidART001500522-
dc.identifier.wosid000285493700007-
dc.identifier.scopusid2-s2.0-78650893205-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryMetallurgy & Metallurgical Engineering-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaMetallurgy & Metallurgical Engineering-
dc.type.docTypeArticle-
dc.subject.keywordPlusULTRA-FINE WC-
dc.subject.keywordPlusHARD MATERIALS-
dc.subject.keywordPlusMICROSTRUCTURES-
dc.subject.keywordPlusCONSOLIDATION-
dc.subject.keywordAuthornanostructured materials-
dc.subject.keywordAuthorpowder metallurgy-
dc.subject.keywordAuthormechanical properties-
dc.subject.keywordAuthorsintering-
dc.subject.keywordAuthorhigh frequency induction heated sintering-
Appears in Collections:
KIST Article > 2010
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML
Show Simple Item Record

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE