The toughening of Al-Cu-Fe(-B) quasicrystals by Sn particles
- Authors
- Fleury, E; Kim, YC; Kim, DH; Kim, DH; Kim, WT
- Issue Date
- 2004-03-15
- Publisher
- ELSEVIER SCIENCE BV
- Citation
- JOURNAL OF NON-CRYSTALLINE SOLIDS, v.334, pp.449 - 452
- Abstract
- The effect of soft Sn particles on the room temperature mechanical properties of as-cast Al-Cu-Fe(-B) quasicrystalline (QC) matrix composites has been studied by compression and three-point bending tests on notched specimens. Microstructural investigations indicated that the Sn particle size in the as-cast composites increased linearly with the volume fraction. The addition of about 10 vol.% Sn enabled a twofold increase of the strength for the cast Al-Cu-Fe and a threefold increase of the fracture toughness for the cast Al-Cu-Fe-B composites. The enhancement of the strength was attributed to micro-crack impediment and crack bridging mechanisms in the as-cast QC matrix composites with small and large Sn particle sizes, respectively. (C) 2004 Elsevier B.V. All rights reserved.
- Keywords
- ABRASIVE WEAR BEHAVIOR; PHASE; ABRASIVE WEAR BEHAVIOR; PHASE; toughening; quasicrystals; Al-Cu-Fe(-B)
- ISSN
- 0022-3093
- URI
- https://pubs.kist.re.kr/handle/201004/137760
- DOI
- 10.1016/j.jnoncrysol.2003.12.022
- Appears in Collections:
- KIST Article > 2004
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.