Full metadata record

DC FieldValueLanguage
dc.contributor.author이상엽-
dc.contributor.authorWon-Ho Lee-
dc.contributor.authorSe-Hee Lee-
dc.contributor.authorJong-Chul Lee-
dc.date.accessioned2021-06-09T04:21:53Z-
dc.date.available2021-06-09T04:21:53Z-
dc.date.issued2018-09-
dc.identifier.citationVOL 18, NO 9-6414-
dc.identifier.issn1533-4880-
dc.identifier.other51835-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/69148-
dc.description.abstractNanoparticles and nanofluids have been implemented in energy harvesting devices, and energy harvesting based on magnetic nanofluid flow was recently achieved by using a layer-built magnet and micro-bubble injection to induce a voltage on the order of 10-1 mV. However, this is not yet suitable for some commercial purpose. In order to further increase the amount of electric voltage and current from this energy harvesting the air bubbles must be segmented in the base fluid, and the magnetic flux of the segmented flow should be materially altered over time. The focus of this research is on the development of a segmented ferrofluid flow linear generator that would scavenge electrical power from waste heat. Experiments were conducted to obtain the induced voltage, which was generated by moving a ferrofluid-filled capsule inside a multi-turn coil. Computations were then performed to explain the fundamental physical basis of the motion of the segmented flow of the ferrofluids and the air-layers.-
dc.publisherJournal of nanoscience and nanotechnology-
dc.titleFeasibility Study on a Segmented Ferrofluid Flow Linear Generator for Increasing the Time-Varying Magnetic Flux-
dc.typeArticle-
dc.relation.page64106414-
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE