Surface modification of Li(Co1/3 Mn1/3Ni 1/3)O2 fine powders using aqueous Al2O 3 sol

Authors
Kim, S.H.Kim, C.-S.Han, K.R.Shim, K.B.
Issue Date
2007-01
Publisher
Trans Tech Publications Ltd
Citation
8th International Symposium on Eco-Materials Processing and Design, ISEPD-8, pp.857 - 860
Abstract
The surface of Li(Ni1/3CO1/3Mn1/3)O 2 was modified with Al2O3 using aqueous alumina sol and the electrochemical properties of the coated oxide were measured and compared with both uncoated and Al-doped one. The alumina coated powder showed 185 mAh/g at first cycle, and 139 mAh/g after 50 cycles in the voltage range of 3.0-4.6 V at 1C rate. The initial discharge capacity of the coated powder was slightly lower than that of the alumina doped one, but the cycle stability of the coated was better than that of the doped.
ISSN
0255-5476
URI
https://pubs.kist.re.kr/handle/201004/81506
DOI
10.4028/0-87849-431-6.857
Appears in Collections:
KIST Conference Paper > 2007
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE