DSpace at KISTKIST Conference Paper2007

Full metadata record

DC Field Value Language
dc.contributor.authorKim, S.H.-
dc.contributor.authorKim, C.-S.-
dc.contributor.authorHan, K.R.-
dc.contributor.authorShim, K.B.-
dc.date.accessioned2024-01-12T07:54:35Z-
dc.date.available2024-01-12T07:54:35Z-
dc.date.created2022-03-01-
dc.date.issued2007-01-
dc.identifier.issn0255-5476-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/81506-
dc.description.abstractThe surface of Li(Ni1/3CO1/3Mn1/3)O 2 was modified with Al2O3 using aqueous alumina sol and the electrochemical properties of the coated oxide were measured and compared with both uncoated and Al-doped one. The alumina coated powder showed 185 mAh/g at first cycle, and 139 mAh/g after 50 cycles in the voltage range of 3.0-4.6 V at 1C rate. The initial discharge capacity of the coated powder was slightly lower than that of the alumina doped one, but the cycle stability of the coated was better than that of the doped.-
dc.languageEnglish-
dc.publisherTrans Tech Publications Ltd-
dc.titleSurface modification of Li(Co1/3 Mn1/3Ni 1/3)O2 fine powders using aqueous Al2O 3 sol-
dc.typeConference-
dc.identifier.doi10.4028/0-87849-431-6.857-
dc.description.journalClass1-
dc.identifier.bibliographicCitation8th International Symposium on Eco-Materials Processing and Design, ISEPD-8, pp.857 - 860-
dc.citation.title8th International Symposium on Eco-Materials Processing and Design, ISEPD-8-
dc.citation.startPage857-
dc.citation.endPage860-
dc.citation.conferencePlaceSZ-
dc.citation.conferencePlaceKitakyushu-
dc.citation.conferenceDate2007-01-11-
dc.relation.isPartOfMaterials Science Forum-
dc.identifier.scopusid2-s2.0-38349084444-
Appears in Collections:
KIST Conference Paper > 2007
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML
Show Simple Item Record

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE