2010-08 | Decomposition of icosahedral phase in Ti52Zr28Ni20 powder during electro-discharge sintering | Song, G. A.; Shin, J. S.; Kang, T. J.; Choi, H. S.; Lee, J. K.; Lee, M. H.; Kim, T. S.; Fleury, E.; Prima, F.; Lee, W. H.; Kim, K. B. |
2005-08 | Design and synthesis of Cu-based metallic glass alloys with high glass forming ability | Kim, Y.C.; Sung, D.S.; Fleury, E. |
2007-02 | Design of a bulk amorphous alloy containing Cu-Zr with simultaneous improvement in glass-forming ability and plasticity | Lee, Seok-Woo; Lee, Sang-Chul; Kim, Yu-Chan; Fleury, E.; Lee, Jae-Chul |
2007-03-25 | Development of metallic glasses for bipolar plate application | Jayaraj, J.; Kim, Y. C.; Seok, H. K.; Kim, K. B.; Fleury, E. |
2010-07-15 | Effect of copper addition on the fracture and fatigue crack growth behavior of solution heat-treated SUS 304H austenitic steel | Alaneme, K. K.; Hong, S. M.; Sen, Indrani; Fleury, E.; Ramamurty, U. |
2006-06-29 | Effect of hydrogenation on the structural, thermal and mechanical properties of Zr-50-Ni-27-Nb-18-Co-5 amorphous alloy | Jayalakshmi, S.; Kim, K. B.; Fleury, E. |
2006-11-15 | Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses | Kim, Y. C.; Lee, J. C.; Cha, P. R.; Ahn, J. P.; Fleury, E. |
2006-09-13 | Fe-based amorphous alloys as bipolar plates for PEM fuel cell | Fleury, E.; Jayaraj, J.; Kim, Y. C.; Seok, H. K.; Kim, K. Y.; Kim, K. B. |
2006-06 | Formation of amorphous phase in the binary Cu-Zr alloy system | Kwon, O. J.; Kim, Y. C.; Kim, K. B.; Lee, Y. K.; Fleury, E. |
2009-10 | High Temperature Mechanical Properties of Rapidly Quenched Zr50Ni27Nb18Co5 Amorphous Alloy | Jayalakshmi, S.; Fleury, E. |
2009 | High temperature properties of hydrogenated Ti50Zr25Co25 rapidly quenched alloy | Jayalakshmi, S.; Fleury, E.; Sordelet, D. J. |
2007-03-25 | Hydrogen permeation properties of Pd-coated Ni60Nb30Ta10 amorphous alloy membrane | Kim, K. B.; Kim, K. D.; Lee, D. Y.; Kim, Y. C.; Fleury, E.; Kim, D. H. |
2007-02 | Hydrogen-induced amorphization and embrittlement resistance in Ti-based in situ composite with bcc-phase in an amorphous matrix | Jayalakshmi, S.; Ahn, J. P.; Kim, K. B.; Fleury, E. |
2008-04 | Hydrogenation of Ti50Zr25Co25 amorphous ribbons and its effect on their structural and mechanical properties | Jayalakshmi, S.; Fleury, E.; Lee, D. Y.; Chang, H. J.; Kim, D. H. |
2010-10 | Hydrogenation properties of Ni-Nb-Zr-Ta amorphous ribbons | Jayalakshmi, S.; Choi, Y. G.; Kim, Y. C.; Kim, Y. B.; Fleury, E. |
2008-06-12 | Interfacial intermetallic phases and nanoeutectic in rapidly quenched Sn-Ag-Cu on Au under bump metallization | Bali, R.; Fleury, E.; Han, S. H.; Ahn, J. P. |
2012-04-15 | Mechanical properties and microstructures of Al-1Fe-(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering | Mendis, C. L.; Jhawar, H. P.; Sasaki, T. T.; Oh-ishi, K.; Sivaprasad, K.; Fleury, E.; Hono, K. |
2007-12 | Mechanical relaxations of a (Zr77.5Ti22.5)(55)(Ni48Cu52)(21.25)Be-23.75 amorphous alloy studied using dynamic mechanical analysis | Jeong, H. T.; Fleury, E.; Kim, W. T.; Kim, D. H. |
2011-05-24 | Microstructure and mechanical properties of annealed SUS 304H austenitic stainless steel with copper | Sen, Indrani; Amankwah, E.; Kumar, N. S.; Fleury, E.; Oh-ishi, K.; Hono, K.; Ramamurty, U. |
2011-06 | Microstructure and mechanical properties of Fe-Si-Ti-(Cu, Al) heterostructured ultrafine composites | Park, J. M.; Kim, D. H.; Mattern, N.; Kim, K. B.; Fleury, E.; Eckert, J. |
2009-12 | Nano-porous surface states of Ti-Y-Al-Co phase separated metallic glass | Jayaraj, J.; Park, J. M.; Gostin, P. F.; Fleury, E.; Gebert, A.; Schultz, L. |
2006-12 | Nanometer-sized porous Ti-based metallic glass | Jayaraj, J.; Park, B. J.; Kim, D. H.; Kim, W. T.; Fleury, E. |
2012-09-25 | Necking mechanisms on porous metallic glass and W compacts using electro-discharge sintering | Cho, J. Y.; Song, G. A.; Choi, H. S.; Kim, Y. H.; Kim, T. S.; Lee, M. H.; Lee, H. S.; Kim, H. J.; Lee, J. K.; Fleury, E.; Seo, Y.; Kim, K. B. |
2008-02 | Poisson's ratio and fragility of bulk metallic glasses | Na, J. H.; Park, E. S.; Kim, Y. C.; Fleury, E.; Kim, W. T.; Kim, D. H. |
2008-01 | Propagation of shear bands in a Cu47.5Zr47.5Al5 bulk metallic glass | Kim, K. B.; Das, J.; Lee, M. H.; Yi, S.; Fleury, E.; Zhang, Z. F.; Wang, W. H.; Eckert, J. |
2006-06 | Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites | Jayalakshmi, S.; Kailas, Satish V.; Seshan, S.; Fleury, E. |
2008-04 | Structural and magnetic study of bulk glassy Fe(72-x)Co(x)B(20)Si(4)Nb(4) alloys | Kane, S. N.; Fleury, E.; Kwon, O. J.; Khinchi, S. S.; Gupta, A. |
2012 | Structural induced changes in properties and crystallization behaviour of Co80Zr10V10 alloy | Kane, S. N.; Panchal, S.; Fleury, E. |
2007-01 | Structure-mechanical properties correlation in a hydrogenated Ti-based in-situ amorphous matrix composite | Jayalakshmi, S.; Fleury, E.; Kim, K.B. |
2007-03-25 | Studies on hydrogen embrittlement in Zr- and Ni-based amorphous alloys | Jayalakshmi, S.; Park, S. O.; Kim, K. B.; Fleury, E.; Kim, D. H. |