1985-01 | Drying of latex and films formation. | 김광웅 |
1984-01 | Drying of latex and films formation. | 김광웅 |
1985-12 | Effect of coupling agents on CaCO//3-filled HDPE systems. | 김광웅; 김병철 |
1987-04 | Effect of filler particle size on the rheological properties of suspension. I. CaCO//3 suspended in an aqueous HEC solution. | 김광웅; 김병철; 김공수; 김영식 |
1991-02 | Effect of filler particle size on the rheological properties of suspension: 2. Glass bead suspended in aqueous PVA solution. | 김광웅; 김공수; 김영식 |
1989-06 | Effect of ionomer on polystyrene/polyethylene blends. | 김광웅; 박태석 |
1987-06 | Effects of plasticizer and processing aid on the rheological and physical properties of PVC. | 김광웅; 김병철; 홍순만 |
1989-12 | Extrudate swell mechanism. | 김광웅; 서용석 |
1981-01 | Flow and leveling of water-based paints. | 김광웅 |
1986-04 | Foam extrusion of rigid PVC. I. Effect of decomposition mode of chemical blowing agent on the foaming characteristics and foam properties. | 김광웅; 김병철; 홍성일 |
1986-06 | Foam extrusion of rigid PVC. II. Effects of processing additives and processing parameters on foam processing. | 김광웅; 김병철; 홍성일 |
1986-08 | Foam extrusion of rigid PVC. III. The rheological properties of unexpanded and expandable formulations. | 김광웅; 김병철; 홍성일 |
1989-01 | Foam processing with rigid polyvinylchloride : | 김광웅; 김병철; 홍순만; S. K. Park; S. M. Hong |
1997-08 | Future of polymer processing technologies | 김광웅 |
2009-07 | GaAs 기반 1300 nm 파장대역 InAs 양자점 레이저 다이오드의 발진 특성 | 김광웅; 조남기; 송진동; 이정일; 박정호; 이유종; 최원준 |
1994-01 | In-situ polymer blends via chain trnasfer living polymerization (CTLP). | 김정안; 김광웅; 이영준; 박태석; 조재철; 이종희; 황승상; 윤혜성; 안병인; 차국헌; Roderic P. Quirk |
1971-01 | Influence of reservoir diameter on the melt elasticity in capillary flow | 김광웅; 한창대 |
2007-09 | InGaAs 양자점 레이저 다이오드와 양자우물 레이저 다이오드의 특성 비교 | 정경욱; 김광웅; 유성필; 조남기; 박성준; 송진동; 최원준; 이정일; 양해석 |
1990-05 | Introduction of engineering plastics. | 김광웅 |
1982-01 | Inverse emulsion copolymerization of acrylamide-acrylonitrile. | 김광웅; 이화영; 박봉현 |
1982-01 | Inverse emulsion polymerization of acrylamide. | 김광웅; 이화영; 박봉현 |
1982-01 | Inverse emulsion polymerization of N-vinylpyrrolidone. | 김광웅; 이화영; 송덕만 |
1997-08 | It's urgent to recycle plastics | 김광웅 |
1973-01 | Measurements of pressure-hole error in flow of viscoelastic polymeric solutions: effects of hole size and solution concentration. | 김광웅; 한창대 |
1986-02 | Measurements of the rheological properties of molten polystyrenes. | 김광웅; 황의정 |
1973-01 | Measurements of the viscoelastic properties of poly(methylmethacrylate) and polystyrene blends. | 김광웅; 한창대; J. Parker; N. Siskovic; C. R. Huang |
1989-02 | Mechanical properties of polyethylene/ethylene-propylene rubber blends containing block copolymers. | 김광웅; 현재천 |
1990-12 | Modeling of tubular film blowing process. | 김광웅; 서용석 |
1998-02 | New synthetic methods for polyolefins | 김정안; 김건형; 곽순종; 김광웅 |
1983-01 | Outdoor exposure test of water-based gloss paints. | 김광웅 |