| - | A measurement of the effectiveness of double-tube heat exchanger for hydrogen liquefaction | 최항집; Baik Jong Hoon; 강병하; 최영돈 |
| - | A numerical simulation on room temperature measurement method for VAV system control | 김원년; Kim Seo Young; 강병하; 현재민 |
| 1996-01 | A numerical study on the regenerator performance and heat transfer in oscillating flow.. | 이건태; 강병하; 이재헌 |
| 2001-10 | A study of droplet motion on an inclined surface | 김진호; 김호영; 강병하; 이재헌 |
| 2001-10 | A study of revulet flow on an inclined solid surface | 김진호; 김호영; 강병하; 이재헌 |
| 1992-01 | A study on flow and heat transfer characteristics in a duct with periodic pressure gradient. | 강병하; 이재헌; 이건태 |
| - | Air-cooled absorber design for an NH3/H2O absorption heat pump | Kim Young Il; 강병하 |
| - | Air-cooled absorber design for an NH3H2O absorption heat pump | Kim Young Il; 강병하 |
| - | An experimental study of convective heat transfer in a channel filled with aluminium foam materials | KIM JIN HO; 강병하; Kim Seo Young; 이재헌 |
| 1995-01 | An experimental study of heat and mass transfer during absorption and desorption processes in a hydride material bed. | 강병하; 박찬우; 정시영; 이춘식 |
| 1993-01 | An experimental study on convection heat transfer in an oscillating flow of a heater tube for stirling cycle machines. | 강병하; 이춘식; 이건태; 이재헌 |
| 2008-05 | An experimental study on heat transfer of a falling liquid film in air channel flow | 오동은; 강병하; 김석현; 이대영 |
| - | An Experimental study on the heat transfer performance enhancement by pulsatile flow in a triangular grooved channel | 권오준; Lee Dae-Young; Kim Seo Young; 강병하; 김용찬 |
| - | Analysis of an air-cooled plate fin ammonia condenser | Kim Young Il; 강병하 |
| 1999-01 | Comparative analysis of the minimum capacity of an ice-on-coil thermal storage system for various operation strategies | 이대영; 정성훈; 강병하 |
| 1996-01 | Computer simulation of an absorption heat pump for recovering low grade waste heat. | 강상우; 강병하; 정시영; 이춘식 |
| - | Conjugate heat transfer from a continuously moving material in a paralle channel flow for cooling in forming manufacturing processes. | 강병하; Y. Jaluria |
| 2000-01 | Control strategy for economic operation of an ice-storage system considering cooling load variation | 정성훈; 이대영; 강병하; 김우승 |
| - | Convection from a rectangular heated block in pulsating channel flow. | 강병하; 현재민; S. Y. Kim |
| - | Convective heat transfer from anisotropic porous fin in a plate-fin heat exchanger. | 백진욱; Kim Seo Young; 강병하 |
| - | Cooling characteristics at hot side of the thermoelectric module for an air conditioner | 장혁재; 강병하; Kim Seo Young; 김석현 |
| - | Cooling performance of a vuilleumier cycle heat pump. | 강병하; 이전태; 이재현; 유호선 |
| - | Current status of heating, ventilation, air-conditioning, and refrigeration (HVAC & R) industry in Korea | Kim Ho-Young; 강병하; 노승탁 |
| - | Current status of R & D on heating, ventilation and air-conditioning in Korea | 강병하; Kim Ho-Young |
| - | Design and performance evaluation of an ortho-para H2 conversion equipment | Baik Jong Hoon; 강병하 |
| 1998-09 | Design and performance evaluation of ortho-para H2 conversion equipment | 백종훈; 강병하 |
| 1996-01 | Design and performance test of a direct cooling equipment for hydrogen liquefaction. | 백종훈; 강병하; 장호명 |
| - | Determination of the minimum capacity of the ice storage system according to the various operation strategies | Lee Dae-Young; 강병하 |
| - | Dynamic behavior of heat and hydrogen transfer in a metal hydride chiller. | 강병하; PARK CHAN WOO; Chun-Sik Lee |
| - | Effect of aluminum foam surface on jet impingement heat transfer | 백진욱; Kim Seo Young; 강병하 |
| 2001-09 | Effect of nozzle size and height of aluminum foam heat sink on jet impingement heat transfer | 백진욱; 김서영; 강병하 |
| 2000-01 | Effect of the hydraulic boundary layer on the convective heat transfer in porous media | 진재식; 이대영; 강병하 |
| 1998-12 | Effect of vapor-cooled heat stations in a cryogenic vessel | 김서영; 강병하; 최항집 |
| 1999-03 | Effectiveness measurement of a double-tube heat exchanger for a hydrogen liquefaction system | 최항집; 백종훈; 강병하; 최영돈 |
| 2000-01 | Effects of hydrophilic surface treatment on condensation heat transfer at the outside wall of horizontal tube | 황규대; 박노성; 강병하 |
| - | Effects of hydrophilic surface treatment on evaporation heat transfer at the outside wall of enhanced tubes | 강병하; Kim Ho-Young; 박노성; HWANG KYU DAE |
| 2000-01 | Effects of hydrophilic surface treatment on evaporation heat transfer at the outside wall of horizontal tubes | PARK NO SUNG; 황규대; 강병하; 정진택 |
| 2000-01 | Effects of ortho-para hydrogen conversion on hydrogen liquefaction performance | 최항집; 강병하; 최영돈 |
| - | Enhancement of natural convection and pool boiling heat transfer via ultrasonic vibration | Kim Ho-Young; 김이구; 강병하 |
| - | Experimental investigation on dynamic behavior of heat and hydrogen transfer in a metal hydride cooling system. | 강병하; PARK CHAN WOO; Chun-Sik Lee |
| 1992-01 | Experimental investigation on heat transfer characteristics in a uniformly heated pipe with pulsating pressure. | 강병하; 이춘식; 이재헌; 이건태 |
| 2005-06 | Experimental Study on the Hydrophilic Porous Film Coating for Evaporative Cooling Enhancement | 이대영; 이재완; 강병하 |
| 1999-01 | Experimental study on the performance improvement of a screw-compressor-type chiller | 이대영; 정성훈; 강병하; 홍희기 |
| - | Fire-induced flow in a building with a side vent | Kim Seo Young; 강병하 |
| 1997-12 | Fire-induced flow in building fires | 김서영; 강병하 |
| - | Fire-induced turbulent flow in a vertical shaft | 엄석기; Kim Seo Young; 강병하 |
| 2000-10 | Flow and Heat Transfer Characteristics of Aluminum Foam Porous Fins | 김서영; 백진욱; 강병하 |
| - | Forced convective heat transfer from anisotropic aluminum foam in a channel flow | 백진욱; Kim Seo Young; 강병하; 현재민 |
| - | Heat storage characteristics of porous media from forced convective flow in a pipe. | 강병하; 백진욱; 현재민 |
| 1996-01 | Heat transfer analysis on the heat exchanger of a stirling cycle machine. | 이대영; 조관식; 강병하; 노승탁 |
| 1998-03 | Heat transfer characteristics by an oscillating flow in a tube with a regenerator | 이건태; 강병하; 이재헌 |
| - | Heat transfer characteristics in an oscillating flow of stirling engine heat exchangers. | 강병하; Chun-Sik Lee; Lee Geon Tae; 이재헌 |
| - | Heat transfer characteristics of aluminum foam heat sink. | 백진욱; Koo Jae Youl; Kim Seo Young; 강병하; 김석현 |
| - | Heat transfer correlation of porous fin in a plate-fin heat exchanger | Kim Seo Young; KIM JIN HO; 강병하; 류해성 |
| - | Heat transfer correlations for porous-fin heat exchanger design | 강병하; Kim Seo Young; KIM JIN HO |
| - | Heat transfer enhancement by impinging air jet on porous surfaces | 백진욱; Kim Seo Young; 강병하 |
| - | Heat transfer enhancement from a heated block | Kim Seo Young; 강병하; 백진욱 |
| - | Heat transfer from an aluminum foam heat sink for electronics cooling | 백진욱; Kim Seo Young; 강병하 |
| 1995-01 | Heat transfer of oscillating flow in a cylinder with regenerator. | 강병하; 김진호; 이재헌 |
| - | Hydrophilic treatment effects on fill packings characteristics in a counterflow cooling tower | KIM JIN HO; Kim Seo Young; 강병하 |
| - | Influence of the hydraulic boundary layer on the convective heat transfer in porous media | Lee Dae-Young; 진재식; 강병하 |
| - | Instability of rivulet flow on inclined solid surfaces | Kim Ho-Young; KIM JIN HO; 강병하; 이재헌 |
| 1999-01 | International heat pump status and policy review : national position paper, South Korea | 강병하 |
| 2000-05 | Investigation on state-of-the-art of HVAC technology | 김호영; 강병하 |
| - | Maximum cold energy practically chargeable in an ice-on-coil thermal storage system. | Lee Dae-Young; 강병하 |
| - | Measurement of effective thermal conductivity and permeability on aluminum foam metal | 백진욱; 강병하; Kim Seo Young; 현재민 |
| - | Measurement of effective thermal conductivity and permeability on aluminum foam metal | 백진욱; Kim Seo Young; 강병하; 현재민 |
| 1999-01 | Measurement of effective thermal conductivity and permeability on aluminum foam metal | 백진욱; 강병하; 김서영; 현재민 |
| 2003-05 | Mechanisms of convective and boiling heat transfer enhancement via ultrasonic vibration. | 김이구; 김호영; 강승민; 강병하; 이진호 |
| 1990-01 | Mixed convection transport from a protruding heat source module on a vertical surface. | 강병하; Y. Jaluria |
| 1990-01 | Mixed convection transport from an isolated heat source module on a horizontal plate. | 강병하; Y. Jaluria; S. S. Tewari |
| 1990-01 | Natural convection heat transfer characteristics of a protruding thermal source located on horizontal and verical surfaces. | 강병하; Y. Jaluria |
| - | Natural convection in an enclosure partially filled with a hydraulically and thermally anisotropic porous layer | Kim Seo Young; 강병하 |
| - | Natural convection in an enclosure with a vertical anisotropic porous layer | Kim Seo Young; 구재모; 강병하 |
| - | New surface layer formation by ion assisted reaction (IAR) and optimum plasma zone (OPZ) | KOH SEOK KEUN; KIM KI HWAN; 정형진; 하삼철; 강병하; Elena Klalkina; Serguei Kondranin |
| 1998-08 | Numerical analysis of an air-cooled ammonia condenser with plate fins | 김영일; 강병하 |
| 1997-01 | Numerical analysis of an air-cooled ammonia condenser with plate fins | 김영일; 강병하 |
| 2002-11 | Numerical analysis on the transient cooling characteristics of an infrared detector cryochamber | 이정훈; 김호영; 강병하 |
| - | Numerical prediction for smoke flow through a vertical shaft in multi-level building fires | 엄석기; Kim Seo Young; 강병하 |
| 1991-03 | Numerical simulation of conjugate transport from a continuous moving plate in materials processing | 강병하; Y. Jaluria; M. V. Karwe |
| - | Numerical simulation of the fluid flow and heat transfer arising from a heated moving plate in a uniform forced flow. | 강병하; Y. Jaluria |
| - | Numerical simulation on flow and heat transfer characteristics in a curved tube with pulsating pressure gradient. | 강병하; 이재헌; 백영렬 |
| - | Numerical simulation on thermal transport in thermally developing region of a pulsating channel flow. | 강병하; 현재민; S. Y. Kim |
| 1992-01 | Numerical study of the fluid flow and heat transfer due to a heated plate moving in a uniform forced flow | 강병하; Y. Jaluria |
| 1994-01 | Numerical study on pulsatile flow and heat transfer in a curved tube with constant heat flux. | 강병하; 백영렬; 오명도; 이재헌 |
| - | Oscillating flow and heat transfer in a stirling cycle machines. | 강병하; Lee Geon Tae; 이재헌 |
| 1998-06 | Performance analysis of a hydrogen liquefaction system using commercial cryogenic refrigerators for procooling | 김승현; 장호명; 강병하 |
| - | Performance analysis on a module type of metal hydride heat transformer for waste heat recovery. | 강병하; A. Yabe |
| - | Performance test of a cryogenic vessel with vapor-cooled heat stations | Kim Seo Young; 강병하; 최항집 |
| 1999-01 | Performance test of Joule-Thomson cryocooler with H₂ gas | 백종훈; 강병하; 홍성제; 장호명 |
| 1999-01 | Prediction of liquid amount in hydrogen liquefaction systems using GM refrigerator | 박대종; 장호명; 강병하 |
| 1999-01 | Prediction of practically chargeable cold energy in an ice storage system | 이대영; 강병하; 김민수 |
| 1992-01 | Preliminary design conditions for a thermally actuated refrigerator based on the vuilleumier cycle. | 강병하; 유호선 |
| - | Pulsating flow and heat transfer in a channel filled with porous media. | 강병하; 현재민; S. Y. Kim |
| 2000-03 | R & D on high performance fin and tube heat exchanger for air-conditioning of automobiles | 김서영; 서훈; 김원년; 강병하 |
| - | R & D trends of a plate-fin heat exchanger | 강병하; Kim Seo Young |
| - | Regenerative evaporative cooling system | O Sukhyun KIM; Lee Dae-Young; 강병하 |
| - | Regenerator efficiency enhancement due to the combination of regenerator materials in an oscillating flow of a stirling cycle machine | 강병하; G. T. Lee; J. H. Lee |
| - | Resonant heat transfer enhancement by acoustic excitation in a side-heated rectangular enclosure | Kim Seo Young; 김성기; 강병하 |
| - | Resonant heat transfer enhancement by flow pulsation | Kim Seo Young; 강병하 |
| 1998-01 | State-of-the-art in plate-fin heat exchangers | 김서영; 강병하 |
| - | System design and performance analysis of an absorption heat transformer for waste heat recovery. | 강병하; Chun-Sik Lee; Y. I. Kim |
| 1991-01 | System design and performance prediction of a stirling engine for residential heat pumps. | 김웅태; 강병하; 이춘식 |
| - | Thermal analysis for a liquid hydrogen vessel | Kim Seo Young; 강병하 |
| 1997-01 | Thermal analysis of a liquid hydrogen vessel | 김서영; 강병하 |
| - | Thermal design analysis of a liquid hydrogen vessel | Kim Seo Young; 강병하 |
| 2002-11 | Thermal isulation technology for cryogenic cooling devices | 김호영; 강병하 |
| 1993-01 | Thermal modeling of the continuous casting process | 강병하; Y. Jaluria |
| - | Thermal modelling of the continuous casting process. | 강병하; Y. Jaluria |
| - | Thermal performance of a resonant cooling device for CPU in a personal computer | Kim Seo Young; 김성기; 강병하 |
| - | Thermal performance of triangular folded fin heat sinks in a duct | Kim, Seo Young; 지태호; 최동규; 강병하 |
| 1998-09 | Thermal response of porous media cooled by a forced convective flow | 백진욱; 강병하; 현재민 |
| 2003-04 | Thermal transport from an aluminum foam heat sink in a confined impinging air jet. | 황준; 김서영; 강병하 |
| 2002-09 | Transition of rivulet flow from linear to droplet stream | 김호영; 김진호; 강병하; 이승철; 이재헌 |
| 2001-05 | 가공관의 외벽에서 친수성 표면처리가 증발열전달에 미치는 영향 | 박노성; 황규대; 김호영; 강병하; 정진택 |
| 2005-10 | 그루브 채널에서 왕복 유동에 의한 열확산 촉진에 관한 연구 | 김서영; 김수현; 강병하 |
| 2000-12-19 | 금속표면의 개질방법 및 이에 의해 표면 개질된 금속 | 고석근; 강병하; 최원국; 정형진 |
| 2002-02-01 | 금속표면의 개질방법 및 이에 의해 표면 개질된 금속 | 고석근; 강병하; 최원국; 정형진 |
| 2005-01 | 다공물질 표면처리가 경사판의 증발냉각에 미치는 영향에 관한 실험적 연구 | 이대영; 이재완; 강병하 |
| 2000-11-07 | 다공핀 평판관형 열교환기 | 강병하; 김서영; 류해성; 김진호; 이대영 |
