| 1996-06-01 | (111) Twins in BaTiO3 thin films deposited by RF magnetron sputtering | Jang, JW; Kim, YH; Hahn, TS; Choi, SS; Chung, SJ |
| 2020-11 | 150 KeV Cu- ion- implantation in SrVO3 thin films: A study of Cu induced defect states | Saraswat, Himani; Chaudhary, Surekha; Varshney, Mayora; Devi, Devarani; Singh, Fouran; Won, S. O.; Shin, Hyun-Joon; Sharma, Aditya |
| 2020-01 | 3D-Printed Sugar Scaffold for High-Precision and Highly Sensitive Active and Passive Wearable Sensors | Ho, Dong Hae; Hong, Panuk; Han, Joong Tark; Kim, Sang-Youn; Kwon, S. Joon; Cho, Jeong Ho |
| 1999-01 | A new route to the fabrication of Si3N4/SiC nanocomposite | Kim, CS; Oh, YS; Cho, WS; Lim, DS; Cheong, DS |
| 1996-09 | Abnormal growth of faceted (WC) grains in a (Co) liquid matrix | Park, YJ; Hwang, NM; Yoon, DY |
| 2007-01 | Anisotropic polar state of Sr0.75Ba0.25Nb2O6 single crystal | Simon, Annie; Joo, Gi-Tae; Maglione, Mario; Ravez, Jean |
| 2006-12 | Application of spark plasma sintering for growing dense Pb(Mg1/3Nb2/3)O-3-35 mol% PbTiO3 single crystal by solid-state crystal growth | Park, Jong-Keuk; Chung, Ui-Jin; Kim, Doh-Yeon |
| 2022-10 | Athermal glass work at the nanoscale: Engineered electron-b eam-induce d viscoplasticity for mechanical shaping of brittle amorphous silica | Kang, Sung-Gyu; Jeong, Kyeongjae; Paeng, Jeongin; Jeong, Wonseok; Han, Seungwu; Ahn, Jae-Pyeong; Boles, Steven; Han, Heung Nam; Choi, In-Suk |
| 1998-09 | Cationic ordering structures of lead magnesium niobates with isovalent dopants having different ionic radii | Kim, BK; Cha, SB; Park, JH; Park, SJ |
| 2001-04 | Characteristics of AA6061/BN composite fabricated by pressureless infiltration technique | Lee, KB; Ahn, JP; Kwon, H |
| 2016-07 | Characterization of ancient Korean pigments by surface analytical techniques | Kim, Minjung; Lee, Jihye; Doh, Jung-Mann; Ahn, Heesook; Kim, Hae Dong; Yang, Yimin; Lee, Yeonhee |
| 2011-02-25 | Characterization of plasma-sprayed Y2O3 coating and investigation of its visual aspect change | Seok, Hyun-Kwang; Choi, Eun Young; Cha, Pil-Ryung; Son, Myung-Chan; Choi, Byoung Lyong |
| 2000-09-30 | Chromaticity, hydrothermal stability, and mechanical properties of t-ZrO2/Al2O3 composites doped with yttrium, niobium, and ferric oxides | Lee, DY; Kim, DJ; Song, YS |
| 1995-09-01 | COMPOSITION AND HARDNESS OF CHEMICALLY VAPOR-DEPOSITED SILICON-CARBIDE WITH VARIOUS MICROSTRUCTURES | KIM, YW; PARK, SW; LEE, JG |
| 2009-07-01 | Consolidation of nanostructured ZrSi2-Si3N4 synthesized from mechanically activated (4ZrN+11Si) powders by high frequency induction heated combustion synthesis | Shon, In-Jin; Park, Jeong-Hwan; Yoon, Jin-Kook; Park, Hyun-Kuk |
| 2006-03 | Correlation between temperature coefficient of resonant frequency and tetragonality ratio | Choi, JW; van Dover, RB |
| 2011-08 | Corrosion of Ti3AlC2 at 800-1100 degrees C in Ar-0.2% SO2 gas atmosphere | Lee, Dong Bok; Park, Sang Whan |
| 2006-04-01 | Coupled TG-MS study on the intermediate for formation of PbO(t) from PbO(O) in synthesis of perovskite PMN-PT | Han, KR; Kim, CS; Kwon, YS |
| 2020-05 | Crystal structure and piezoelectric characteristics of various phases near the triple-point composition in PZ-PT-PNN system | Lee, Tae-Gon; Kim, Sun-Woo; Kim, Eun-Ji; Lee, Sang Jin; Hwang, Hyun-Gyu; Hong, Youn-Woo; Kim, Jeong Seog; Chae, Keun Hwa; Choi, Ji-Won; Kang, Chong-Yun; Nahm, Sahn |
| 2019-06-30 | Defect induced broadband visible to near-infrared luminescence in ZnAl2O4 nanocrystals | Jain, Megha; Manju; Gundimeda, Abhiram; Kumar, Sanjay; Gupta, Govind; Won, Sung Ok; Chae, Keun Hwa; Vij, Ankush; Thakur, Anup |
| 2019-03 | Determination of the appropriate piezoelectric materials for various types of piezoelectric energy harvesters with high output power | Kim, Sun-Woo; Lee, Tae-Gon; Kim, Dae-Hyeon; Lee, Ku-Tak; Jung, Inki; Kang, Chong-Yun; Han, Seung Ho; Kang, Hyung-Won; Nahm, Sahn |
| 2003-04-10 | Dielectric and patch antenna characteristics of new high-Q (1-x)(Al1/2Ta1/2)O-2-x(Mg1/3Ta2/3)O-2 (0 <= x <= 1.0) | Choi, JW; Kang, CY; Sim, SH; Yoon, SJ; Kim, HJ; Yoon, KH |
| 2004-08 | Dielectric properties of ZrTiO4 thin films synthesized by sol-gel method | Kim, DS; Park, DH; Kim, GD; Choi, SY |
| 2019-05 | Direct addition of lithium and cobalt precursors to Ce0.8Gd0.2O1.95 electrolytes to improve microstructural and electrochemical properties in IT-SOFC at lower sintering temperature | Accardo, Grazia; Frattini, Domenico; Ham, Hyung Chul; Yoon, Sung Pil |
| 1996-03-01 | Effect of amount and composition of additives on the fracture toughness of silicon nitride | Choi, HJ; Kim, YW; Lee, JG |
| 2004-05 | Effect of electrode configuration on phase retardation of PLZT films grown on glass substrate | Choi, JJ; Kim, DY; Park, GT; Kim, HE |
| 2011-06 | Effect of Fe2O3 on properties and densification of 8YSZ by pulsed current activated sintering | Shon, In-Jin; Du, Song-Lee; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Jeong-Hwan |
| 2001-01 | Effect of initial alpha-phase content of SiC on microstructure and mechanical properties of SiC-TiC composites | An, HG; Kim, YW; Lee, JG |
| 1998-12 | Effect of initial alpha-phase content on microstructure and mechanical properties of sintered silicon carbide | Kim, YW; Mitomo, M; Emoto, H; Lee, JG |
| 2013-03 | Effect of Milling on Properties and Consolidation of TiO2 by High-Frequency Induction Heated Sintering | Shon, In-Jin; Lee, Geon-Woo; Doh, Jung-Mann; Yoon, Jin-Kook |
