| 2017-09 | A combined analytical formulation and genetic algorithm to analyze the nonlinear damage responses of continuous fiber toughened composites | Jeon, Haemin; Yu, Jaesang; Lee, Hunsu; Kim, G. M.; Kim, Jae Woo; Jung, Yong Chae; Yang, Cheol-Min; Yang, B. J. |
| 2001-04 | Characteristics of AA6061/BN composite fabricated by pressureless infiltration technique | Lee, KB; Ahn, JP; Kwon, H |
| 2014-05 | Combinatorial Influence of Bimodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites | Hong, Sung Hwan; Kim, Jeong Tae; Lee, Min Woo; Park, Jin Man; Lee, Min Ha; Kim, Bum Sung; Park, Jun Young; Seo, Yongho; Suh, Jin Yoo; Yu, Peng; Qian, Ma; Kim, Ki Buem |
| 1992-12-15 | EFFECT OF COLD-ROLLING ON THE TENSILE PROPERTIES OF (AL2O3)P/AL COMPOSITES | LEE, JC; SUBRAMANIAN, KN |
| 2016-07 | Effect of magnesium on nitridation and infiltration of aluminum powder | Lee, Kon-Bae; Kim, Yong Hwan; Ahn, Jae-Pyoung; Choi, Hyun Joo |
| 2017-06 | FABRICATION OF AZ31/CNT SURFACE NANO-COMPOSITE BY DOUBLE-PASS FRICTION STIR PROCESSING | Kim, Jae-Yeon; Hwang, Jung-Woo; Kim, Hye-Young; Lee, Seung-Mi; Jung, Woo-Sang; Byeon, Jai-Won |
| 2017-11-22 | Graphene-Carbon-Metal Composite Film for a Flexible Heat Sink | Cho, Hyunjin; Rho, Hokyun; Kim, Jun Hee; Chae, Su-Hyeong; Thang Viet Pham; Seo, Tae Hoon; Kim, Hak Yong; Ha, Jun-Seok; Kim, Hwan Chul; Lee, Sang Hyun; Kim, Myung Jong |
| 2017-07 | Mechanical and electrical properties of cement paste incorporated with pitch-based carbon fiber | Rhee, Inkyu; Kim, Jin Hee; Park, Sang Hee; Lee, Sungho; Ryu, Bong Ryeul; Kim, Yoong Ahm |
| 2010-10 | Mechanical synthesis and rapid consolidation of a anostructured Cu-ZrO2 composite by high frequency induction heating | Shon, In-Jin; Ko, In-Yong; Chae, Seung-Myoung; Kang, Hyun-Su; Doh, Jung-Mann; Hong, Kyung-Tae |
| 2011-06 | Mechanical synthesis and rapid consolidation of nanocrystalline 3Fe(0.67)Cr(0.33)-Al2O3 composite by high frequency induction heating | Shon, In-Jin; Kim, Sung-Yong; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Na-Ra |
| 2022-01 | Outstanding Strengthening and Toughening Behavior of 3D-Printed Fiber-Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity | Yu, Siwon; Hwang, Yun Hyung; Lee, Kang Taek; Kim, Sang Ouk; Hwang, Jun Yeon; Hong, Soon Hyung |
| 2014-06-01 | Phase transformation and mechanical properties of as-cast Ti41.5Zr41.5Ni17 quasicrystalline composites | Park, G. H.; Hong, S. H.; Kim, J. T.; Park, H. J.; Seo, Y.; Suh, J. Y.; Hong, S.; Park, J. M.; Kim, K. B. |
| 2006-06 | Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites | Jayalakshmi, S.; Kailas, Satish V.; Seshan, S.; Fleury, E. |
| 2009-12 | Rapid consolidation of nanocrystalline Al2O3 reinforced Ni-Fe composite from mechanically alloyed powders by high frequency induction heated sintering | Park, Na-Ra; Lee, Dong-Mok; Ko, In-Yong; Yoon, Jin-Kook; Shon, In-Jin |
| 2000-01 | Stacking faults in silicon carbide whiskers | Choi, HJ; Lee, JG |
| 2019-11 | Synthesis of bioinspired ice-templated bulk metallic glass-alumina composites with intertwined dendritic structure | Lee, Je In; Wat, Amy; Kim, Jinyeon; Ryu, Chae Woo; Chang, Hye Jung; Park, Eun Soo; Ritchie, Robert O. |
| 1995-06-15 | THE TENSILE PROPERTIES OF HOT-ROLLED (AL2O3)(P)-AL COMPOSITES | LEE, JC; SUBRAMANIAN, KN |
| 1998-01 | Threshold stress in high strain rate superplasticity of powder metallurgy aluminum alloys and composites | Kum, D; Kim, WJ |
| 2015-07 | Work-hardening and plastic deformation behavior of Ti-based bulk metallic glass composites with bimodal sized B2 particles | Hong, Sung Hwan; Kim, Jeong Tae; Park, Hae Jin; Suh, Jin Yoo; Lim, Ka Ram; Na, Young Sang; Park, Jin Man; Kim, Ki Buem |
