1999-12 | Microstructure of Al alloys deformed through the equal channel angular pressing (ECAP) | 장준연; 고흥석; 최성규; 문인기 |
- | Microstructures of cast and heat treated gamma titanium-aluminides | Chang Joonyeon; Park Jong Woo; 문인기 |
1992-01 | Microstructures of cast gamma(γ)-based titanium-aluminides. | 장준연; 문인기; 박종우; 고흥석 |
- | Microstructures of heat treated gamma(γ)-based titanium-aluminides. | Chang Joonyeon; 문인기; 최종술 |
1996-10 | Prediction of glass forming ability from the transformation kinetics in Fe-Si-B alloy wires. | 고흥석; 문인기; 최종술 |
- | Recrystallization behaviors of original austenite, reversed austenite and martensite in Fe-32% Ni alloy. | 손인진; 문인기; 최종술 |
1985-06 | Separation phenomena of controlled rolled HSLA steels (I) : Effect of hot rolling conditions. | 김정석; 박종우; 문인기 |
1985-09 | Separation phenomena of controlled rolled HSLA steels(II) (Effect of cooling conditions) | 박종우; 김정석; 문인기 |
1981-12 | Strength and impact toughness of Fe-x%Ni-0.23%C martensitic alloys | 문인기; 최종술 |
1990-02 | Study on the cracking of leaded nickel silver cast structure during cold rolling. | 고흥석; 문인기; 박종우 |
1995-02 | Superplastic properties of Al-Mg-Cu-Mn alloys | 박종우; 김희수; 문인기; 하기윤; 이덕열 |
1981-11 | Tempering behavior of Fe-Ni martensitic alloys | 문인기; 최종술 |
1984-07 | The effect of banded structure and sulfide morphology on the anisotropy of tensile ductility and impact toughness | 박종우; 김정석; 문인기 |
1976-05 | The effect of prior deformation on the reverse martensitic transformation in iron-nickel alloys | 문인기; 최종술 |
1992-04 | Thermomechanical processing and superplastic properties of Al-3Cu-2Li-1Mg-0.15Zr alloy | 유재은; 박종우; 문인기 |
1979-05 | 고망간강의 열처리 | 문인기 |
1998-07-09 | 고연성 알루미늄 합금 및 그 제조방법 | 문인기; 김희수; 박종우 |
2002-04-15 | 고투자율의 금속섬유를 사용하여 형성되는 전자파 차폐재 및 그 제조방법 | 유명기; 문인기; 장준연; 고흥석 |
1997-01 | 급냉응고한 Al-Zn-Mg-Zr합금의 시효거동과 인장특성에 미치는 Mn의 영향 | 이영호; 장준연; 유재은; 문인기; 맹선재; 최종술 |
2001-03-13 | 내마모성이 우수하고 열팽창계수가 낮은 아공정Al-Si단련용 합금 및 그의 제조방법 | 문인기; 고흥석; 장준연 |
1984-06 | 냉간단조용 봉선재 | 문인기 |
1998-07-09 | 상용5000계 알루미늄합금의 초소성화열처리방법 | 박종우; 김희수; 문인기 |
1995-01-12 | 센더스트 합금의 박판 제조방법 | 박종우; 문인기 |
1998-01 | 아공정 Al-7.5 wt% Si 합금에 희토류 금속의 첨가 | 장준연; 박남규; 고흥석; 문인기; 최종술 |
1971-07 | 압연용 주철롤의 제조기술과 국내현황 | 문인기 |
2003-06-03 | 연속 전단변형 장치 | 정영훈; 박종우; 신명철; 문인기 |
2004-01-23 | 연속 전단변형 장치 | 정영훈; 박종우; 신명철; 문인기 |
2002-07-08 | 연속 전단변형 장치 | 정영훈; 박종우; 신명철; 문인기 |
2002-02-01 | 이종액체 계면의 섭동원리를 이용한 구형분말 제조 방법 | 고흥석; 문인기; 장준연; 유명기 |
- | (Undefined) | 문인기 |