| 2016-09 | CALPHAD-based alloy design for advanced automotive steels - Part I: Development of bearing steels with enhanced strength and optimized microstructure | 정우상; 서진유; 심재혁; 박지혜; 김명연; 차성철; 홍승현; 김익수 |
| 2009-11 | Changes in structure and mechanical properties in amorphous hydrogen purification/separation membranes | 에릭플러리; 최윤길; 서진유; 김유찬 |
| 2014-08 | Chemical heterogeneity-induced plasticity in Ti-Fe-Bi ultrafine eutectic alloys | 이찬호; 홍성환; 김정태; 박혜진; 송기안; 박진만; 서진유; 서영호; 퀴안; 김기범 |
| 2014-05 | Combinatorial Influence of Bimodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites | 홍성환; 김정태; 이민우; 박진만; 이민하; 김범성; 박준영; 서용호; 서진유; Peng Yu; Ma Qian; 김기범 |
| 2020-05 | Comparative study of hydrogen embrittlement of three heat-resistant Cr-Mo steels subjected to electrochemical and gaseous hydrogen charging | 서진유; 유일; 이지민; 임현석; 이진희; 황병철 |
| 2001-03 | Controlling the mechanical properties of the metallic sheet via the continuous confined strip shearing process | 이재철; 석현광; 서진유; 정영훈; 이호인 |
| 2005-03 | Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing | 한준현; 허무영; 서진유; 이재철 |
| 2010-05 | Correlation between fracture surface morphology and toughness in Zr-based bulk metallic glasses | 서진유; R. Dale Conner; C. Paul Kim; Marios D. Demetrious; William L. Johnson |
| 2021-12 | Deciphering the role of multiple generations of annealing twins on texture evolution in cold-rolled high entropy alloys during annealing | 서진유; 김동익; 고윤석; Lalit Kaushik; Jaiveer Singh; 강주희; 최시훈 |
| 2021-06 | Deformation mechanisms and texture evolution in high entropy alloy during cold rolling | 서진유; Lalit Kaushik; 김민성; Jaiveer Singh; 강주희; 허윤욱; 최시훈 |
| 2014-08 | Design of sustainable V-based hydrogen separation membranes based on grain boundary segregation | 고원석; 오주영; 심재혁; 서진유; 윤우영; 이병주 |
| 2021-09 | Design of V-Substituted TiFe-Based Alloy for Target Pressure Range and Easy Activation | 조영환; 서진유; 심재혁; 이영수; 무함마드 파이살; 김준형; 장재일 |
| 2020-07 | Determining the effect of added zirconium on the bond character in TiFe alloys using scanning Kelvin probe force microscopy | 서진유; 심재혁; 김하영; 김한진; 한휘준; 손소담; 신형준 |
| 2015-05 | Development of high strength hot rolled low carbon copper-bearing steel containing nanometer sized carbides | Phaniraj Madakashira; 신영민; Joonho Lee; Nam Hoon Goo; 김동익; 서진유; 정우상; 심재혁; 최인석 |
| 2015-03 | Development of nano-crystalline cold sprayed Ni-20Cr coatings for high temperature oxidation resistance | M. Kumar; H. Singh; H. Singh; 홍성민; 최인석; 서진유; N.M. Chavan; S. Kumar; S.V. Joshi |
| 2008-12 | Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility | Hofmann, DC; 서진유; Wiest, A; Lind, ML; Demetrious, MD; Johnson, WL |
| 2013-06 | Direct measurement of hydrogen diffusivity through Pd-coated Ni-based amorphous metallic membranes | 왕영임; 서진유; 이영수; 심재혁; 에릭플러리; 조영환; 고성웅 |
| 2002-09 | Dynamic recrystallization and work softening of the Al alloy during equal channel angular pressing | 이재철; 서진유; 안재평 |
| 2021-08 | EBSD microstructural analysis of AB-type TiFe hydrogen storage alloys | 조영환; 서진유; 심재혁; 김동익; 이영수; 이상인; 하태준; 황병철; 이준호 |
| 2016-01 | Effect of aging treatment on microstructure and intrinsic mechanical behavior of Fe-31.4Mn-11.4Al-0.89C lightweight steel | 이근호; 박성준; 이재은; 문준오; 강전연; 김동익; 서진유; 한흥남 |
| 2014-03 | Effect of Co on the Degradation of the Hydrogen Permeability of Ni-Nb-Zr Amorphous Membranes | 김민현; 묵타; 왕영임; 서진유; 에릭플러리; 김도향 |
| 2001-03 | Effect of compressive stress on inoculated acicular ferrite microstructure | 서진유; 변정수; 심재혁; 조영환; 심재동 |
| 2021-05 | Effect of Cr addition on room temperature hydrogenation of TiFe alloys | 조영환; 서진유; 심재혁; 이영수; 무함마드 파이살; 이상인; 김하영; 정지윤; 허주열 |
| 2012-02 | Effect of creep deformation on the microstructural evolution of 11CrMoVNb heat
resistant steel | 이규호; 박대범; 권숙인; 허주열; 서진유; 심재혁; 정우상 |
| 2003-06 | Effect of deformation histories on texture evolution during equal- and dissimilar-channel angular pressing | 서진유; 한준현; 오규환; 이재철 |
| 2001-12 | Effect of die shape on the deformation behavior in equal-channel angular pressing | 박종우; 서진유 |
| 2020-10 | Effect of gaseous hydrogen embrittlement on the mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloy strengthened by in-situ formed oxide | 서진유; 김영균; 이기안 |
| 2014-10 | Effect of hydrogen on the yielding behavior and shear transformation zone volume in metallic glass ribbons | Yakai Zhao; 최인철; 석무영; 김민현; 김도향; Upadrasta Ramamurty; 서진유; 장재일 |
| 2015-04 | Effect of Nb addition on Z-phase formation and creep strength in high-Cr martensitic heat-resistant steels | 이규호; 홍성민; 심재혁; 서진유; 허주열; 정우상 |
| 2013-09 | Effect of Nb and Cu on the high temperature creep properties of a high Mn-N austenitic stainless steel | 이규호; 서진유; 허주열; 박대범; 홍성민; 심재혁; 정우상 |
