| 2000-12 | Characteristics of a coupled gas lubricated bearing for a scaled-up micro gas turbine | 이용복; 곽현덕; 김창호; 장건희 |
| 2003-09 | Characteristics of friction factor for artificially roughened surfaces. | 하태웅; 주영찬; 이용복; 김창호 |
| 2004-12 | Comparison of theoretical analysis with test results of floating ring seals for the LRE turbo pump | 이용복; 안경민; 김창호; 하태웅 |
| 2020-07 | Computational analysis for scallop seals with sickle grooves, PART I Leakage Performance | 이용복; Andriy V. Zahorulko |
| 2020-07 | Computational analysis for scallop seals with sickle grooves, part II: Rotordynamic characteristics | 이용복; Andriy V. Zahorulko |
| 2021-01 | Computational analysis for scallop seals with sickle grooves,part I: Leakage performance | 이용복; Andriy V. Zahorulko |
| 2018-04 | Copper(I)-Catalyzed Synthesis of 1,4-Disubstituted 1,2,3-Triazoles from Azidoformates and Aryl Terminal Alkynes. | 이재균; 이희진; 서혈림; 민선준; 이용복; 이학준 |
| 2014-09 | Correlation between Friction Coefficient and Sound Characteristics for Cage Instability of Cryogenic Deep Groove Ball Bearings | 류솔지; 최복성; 이전국; 이용복 |
| 2000-11 | Coupled boundary effects on a gas lubricated bearing for a scaled-up micro gas turbine | 곽현덕; 이용복; 김창호; 장건희 |
| 2001-05 | Critical speeds evaluation of turbo pump unit with a elastic-ring inserted ball bearing | 이용복; 김창호; 곽현덕; 하태웅; 우유철 |
| 2001-06 | Critical speeds evaluation of turbo pump unit with a elasticring inserted ball bearing | 이용복; 김창호; 곽현덕; 하태웅; 우유철 |
| 2000-04 | Damping performance analysis of electro-rheological squeeze film damper sealed with slotted rings | 정시영; 김창호; 이용복 |
| 2010-09 | DESIGN AND CONTROL OF HYBRID MAGNETIC BEARING IN A FLYWHEEL ENERGY STORAGE SYSTEM | 김우연; 이종민; 김승종; 이용복; 배용채 |
| 2002-03 | Design and operation characteristics of a two-stage compressor | 이용복; 김태호; 김창호; 이남수; 최동훈 |
| 2001-11 | Design and operation characteristics of a two-stage compressor | 이용복; 이남수; 김태호; 김창호; 최동훈 |
| 2005-09 | Design and Performance Analysis of Air Blower System Operated with BLDC motor for PEM FC Vehicle | 이용복; 김창호; 저스틴 오 |
| 2009-09 | Design and Preliminary Test of the Oil-Free Turbocharger for SUV | 이용복; 박동진; 김창호 |
| 2011-04 | Design and Static Load Performance Prediction of Air Foil Journal / Thrust Bearings for 260 kW Class High Speed Motors | 최복성; 구본진; 이용복; 김창호; 김태호 |
| 2001-05 | Design of a two-stage compressor supported by air-lubricated multi-leaf foil journal bearings | 김태호; 이용복; 김창호; 이남수; 김한길 |
| 2012-03 | Development and Performance Measurement of Oil-Free Turbocharger Supported on Gas Foil Bearings | 이용복; 박동진; 김태호; 심규호 |
| 2001-09 | Development of knowledge based expert system for fault diagnosis industrial rotating machinery | 이태욱; 이용복; 김승종; 김창호; 임윤철 |
| 2019-02 | Droplet-jet mode near-field electrospinning for controlled helix patterns with sub-10um coiling diameter | 이용복; 최선; Dongwoon Shin; Jonghyun Kim; Jiyoung Chang |
| 2014-10 | Durability Evaluation of Deep Groove Ball Bearing for Turbo-pump Unit under Extreme Environment | 최복성; 류솔지; 김초희; 이전국; 이용복 |
| 2010-07 | Dynamic Behavior of Bump Foils withThermal Effect in Air Foil Bearings | 이용복; 조준현; 심규호; 임윤철 |
| 2008-05 | DYNAMIC BEHAVIOR OF THE HYBRID FOIL-MAGNETIC BEARING FOR RIGID ROTORS SYSTEM | 이용복; 이상화; 김승종 |
| 2004-09 | Dynamic characteristics of a flexible rotor system supported by a viscoelastic foil bearing (VEFB) | 이용복; 김태호; 김창호; 이남수; 최동훈 |
| 2006-09 | Dynamic Characteristics of Bump Foils Considering with Thermal Effect in Air Foil Bearings | 이용복; 조준현; 박동진; 김창호; 임윤철 |
| 2000-06 | Dynamic coefficients of a high-speed rotor supported by a slotted ER squeeze film damper | 이용복; 김창호; 석기영; 이남수; 최동훈 |
| 2000-11 | Dynamic coefficients of a high-speed rotor supported by a slotted ER squeeze film damper | 이용복; 김창호; 정시영; 이남수; 최동훈 |
| 2015-02 | Dynamic Performance Characteristics of Floating-Ring Bearings with Varied Oil-Injection Swirl-Control Angles | 다니엘 타무노; 김창호; 이용복 |
