| 2000-06 | Fault diagnosis of rotor bars in a squirrel cage induction motor monitoring electromechanical parameters | 장건희; 박상진; J. H. Chang; 이용복; 김창호 |
| 2012-06 | FEASIBILITY STUDY OF AN OIL-FREE TURBOCHARGER SUPPORTED ON GAS FOIL BEARINGS VIA ON-ROAD TESTS OF A 2-LITER CLASS DIESEL VEHICLE | 심규호; 권석범; 김태호; 이용복 |
| 2013-05 | Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings Via On-Road Tests of a Two-Liter Class Diesel Vehicle | 이용복; 권석범; 김태호; 심규호 |
| 2014-08 | Feasibility Study of instability Control of a Floating Ring Bearing for Turbocharger | Daniel Tamunodukobipi; 최복성; 이용복 |
| 2001-12 | Feasibility study on design of thrust bearing for micro gas turbine generator | 이용복; 곽현덕; 김창호; 장건희 |
| 2001-11 | Feasibility study on design of thrust bearing for micro gas turbine/generator | 곽현덕; 이용복; 김창호; 장건희 |
| 2006-07 | FEM 연료전지의 공기 공급기 | 이용복 |
| 2002-10 | Flexible rotor supported by viscoelastic foil bearings beyond the bending critical speed | 이용복; 김태호; 김창호; 이남수; Jang G-H |
| 2007-05 | High Temperature Lubricants for Air Foil Bearings: Friction and Wear Characteristics of CORONA Series from 25 to 1,000 ℃ | 이용복; 박동진; 조준현; 김창호 |
| 2016-10 | Identification of Modal Parameters of the Steam Turbine Brush Seal | 이용복; 변재승; 팀첸코 |
| 2014-01 | Identification of the dynamic performance of a gas foil journal bearing operating at high temperatures | 심규호; 이용복; 송진우; 김종백; 김태호 |
| 2019-07 | Influence of Cryogenic Fluid on the Friction Interactions in the Ball Bearing consisting of Ag-coated Races and PTFE Cage | 이용복; 곽원일 |
| 1997-11 | Instability control of flexible rotor system support by swirl-controlled turbulent hybrid journal bearings | 이용복; 김창호 |
| 2001-07 | Investigation of the electromechanical characteristics in a squirrel cage induction motor due to broken bars and mass unbalance of a rotor | 장건희; 박승진; 장진호; 이용복; 김창호 |
| 2017-05 | Investigation on High Temperature Steam Effect of Brush Seals for Steam Turbine | 이용복; 변재승; 팀첸코 |
| 2001-05 | Leakage and dynamic characteristics of high pressure multi-stage pump seals | 곽현덕; 이용복; 김창호; 이봉주 |
| 2001-07 | Leakage and rotordynamic analysis for high pressure floating ring seal | 하태웅; 이용복; 김창호 |
| 2002-03 | Leakage and rotordynamic analysis of a high pressure floating ring seal in the turbo pump unit of a liquid rocket engine | 하태웅; 이용복; 김창호 |
| 2003-12 | Leakage and Rotordynamic Analysis of Damper Floating Ring Seal with RoundHole Surfaces in the High Pressure Turbo Pump | 하태웅; 이용복; 김창호 |
| 2001-12 | Leakage and rotordynamic analysis of high pressure floating ring seal in turbo pump. | 하태웅; 이용복; 김창호 |
| 2020-10 | Leakage effects due to bristle deflection and wear in hybrid brush seal of high-pressure steam turbine | 이용복; 하윤석; 하태웅; 변재승 |
| 2007-02 | Measurement of Liquid Density using Tuning Fork | 김충현; 이용복; 이성철 |
| 2001-12 | MEMS/MST 고속 회전체 요소의 안정성에 관한 연구 | 이용복; 곽현덕; 김창호 |
| 2011-11 | Microturbocharger with Air Foil Bearings for a 100W Class Micro Power System and Improvement of Rotordynamic Performance | 이용복; 곽용석; 정진택; 심규호 |
| 2001-08 | New active exhaust noise control method using destructive inteference by difference of transmission paths | 황요하; 이종민; 김경목; 김승종; 이용복 |
| 2001-08 | New active muffler system using variable length bypass exhaust pipes and a very low back pressure muffler | 황요하; 이종민; 김경목; 김승종; 이용복 |
| 2017-04 | NOZZLE NUMBER EFFECTS ON THERMAL STRATIFICATION IN A THERMAL STORAGE TANK | 신유환; 이용복; 강상우; 신동환; 김경호 |
| 2006-09 | Numerical Analysis for Bump Foil Journal Bearing Considering Top Foil Effect And Experimental Investigation | 이용복; 박동진; 김창호 |
| 2002-05 | Numerical modeling of the magnetization of a permanent magnet and its effect on the electromechanical performance of a brushless direct current motor | 장건희; 장정환; 이용복 |
| 2005-02 | Numerical Prediction of Slip Flow Effect on Gas-Lubricated Journal Bearings for MEMS/MST-Based Micro-rotating Machinery | 이용복; 곽현덕; 김창호; 이남수 |
