| 2009-07 | Reappraisal of the work hardening behavior of bulk amorphous matrix composites | 이창면; 박경원; 이재훈; 이홍기; 장재일; 이재철 |
| 1997-01 | Recent R&D trend in thixoforming process | 이재철; 이호인 |
| 1998-01 | Recent trends in spray forming process and its applications | 나형용; 석현광; 오규환; 이재철; 이호인 |
| 1999-12 | Rheological behaviors of the hypoeutectic A357 Al alloy : Pseudoplasticity | 고영진; 윤의박; 이재철; 이호인 |
| 1999-12 | Rheological behaviors of the hypoeutectic A357 Al alloy : Thixotropy | 고영진; 이호인; 이재철 |
| 2009-02 | Role of A phase Separating Element on the Plasticity of Amorphous Alloys : Experiment and Atomic Simulation Study | 박경원; 이창면; 사인영; 이병주; 이재철 |
| 2018-09 | Role of atomic-scale chemical heterogeneities in improving the plasticity of Cu-Zr-Ag bulk amorphous alloys | 안재평; 박경원; 김홍규; 이병주; 이재철 |
| 2009-04 | Role of Free Volume in Strain Softening of As-cast and Annealed Bulk Metallic Glass | 유병길; 박경원; 이재철; U. Ramamurty; 장재일 |
| 2015-10 | Role of Mg for improving mechanical properties (strength and ductility) in Al-Mg alloys | 이병현; 김성훈; 박준형; 원성옥; 안재평; 김형욱; 이재철 |
| 2016-03 | Role of Mg in simultaneously improving the strength and ductility of Al-Mg alloys | 이병현; 김성훈; 박준형; 김형욱; 이재철 |
| 2010-05 | Role of phase separating element on the plasticity in Cu-Zr metallic glasses | 박경원; 에릭플러리; 이병주; 이재철 |
| 2009-04 | Role of phase separation on the plasticity enhancement of high-strength Fe-based amorphous alloys | 이광복; 권오집; 에릭플러리; 위상호; 이재철 |
| 1998-01 | Role of the body mount on the passenger compartment response of a frame/body structured vehicle in frontal crash | 이재철; P. Michael Miller II; R. Krishna Murthy; James Cheng |
| 1990-01 | Rolling of SiC//p reinforced Al alloy composite. | 이재철; K. N. Subramanian |
| 2003-03 | Semi-solid processing of magnesium alloys. | 임창동; 석현광; 이재철; 신광선 |
| 2002-08 | Semiempirical method for process analysis on electric arc spray forming of Fe-0.06%C steel rings | 석현광; H.J. Llewellyn; 이재철; P.S. Grant |
| 2010-07 | Shear localization and the plasticity of bulk amorphous alloys | 박경원; Yoji Shibutani; Michael L. Falk; 이병주; 이재철 |
| 2009-04 | Shear localization and the plasticity of bulk amorphous alloys | 박경원; 이창면; 이재철; 이병주; Yoji Shibutani; Michael L. Falk |
| 2005-11 | Significance of gate geometry and injection speed on the flow behaviors of molten Al alloy during die Filling | 이재철; 석현광; 이홍기 |
| 2015-10 | Sn내 Na 확산 시 직경 및 결정 배향이 미치는 영향 탐구 | 안재평; 허가현; 이지영; 변영운; 최용석; 서종현; 이재철 |
| 2015-05 | Sn내 Na 확산에서의 크기 및 결정배향이 미치는 영향 탐구 | 안재평; 이지영; 변영운; 서종현; 이재철 |
| 1999-05 | Spray forming the wear resistant hypereutectic Al-25Si-X alloy and property evaluation | 이재철; 석현광; 신돈수; 이호인 |
| 2004-04 | Strain hardening of an amorphous matrix composite due to deformation-induced nanocrystallization during quasistatic compression | 이재철; 김유찬; 안재평; 이성학; 이병주 |
| 2001-03 | Straining hardening of the Al alloy sheet during cold rolling and equal channel angular pressing | 이재철; 석현광; 정영훈; 이호인 |
| 2001-06 | Straining hardening of the Al alloy sheet during cold rolling and equal channel angular pressing | 이재철; 석현광; 한준현; 서진유; 이호인 |
| 2006-05 | Strategy for alloy design of bulk amorphous alloy with a simultaneous improvement of glass forming ability and plasticity | 이석우; 이상철; 이재철; 에릭플러리; 김유찬 |
| 2015-04 | Strengthening and Plastic Deformation in Al-xMg Alloys | 이병현; 김성훈; 원성옥; 박준형; 김형옥; 안재평; 이재철 |
| 2009-12 | Structural disordering of amorphous alloys: A molecular dynamics analysis | 이창면; 박경원; 이병주; Yoji Shibutani; 이재철 |
| 2008-04 | Structural disordering process of an amorphous alloy driven by the elastostatic compression at room temperature | 이상철; 이창면; 이재철; 김휘준; Yoji Shibutani; 에릭플러리; Michael L. Falk |
| 2002-03 | Structural evolution of a strip-cast Al alloy sheet processed by continuous equal-channel angular pressing | 이재철; 석현광; 서진유; 한준현; 정영훈 |
