| 2021-03 | 3D Quantitative Light-intensity Dispersion Index of Polymer Nanocomposites Based on Optical Microscopy | 박민; 박종혁; 김재우; 장지운; 오진우; 김성륜 |
| 2017-01 | A probabilistic micromechanical modeling for electrical properties of nanocomposites with multi-walled carbon nanotube morphology | 김성륜; 양범주; 장지운; 임승현 |
| 2013-10 | Application of a Cyclic Butylene Terephthalate Oligomer Resin for Continuous Fiber Reinforced Composites | 김성륜; 노예지; 윤재륜 |
| 2015-07 | APPLICATION OF HIGH IMPREGNATION CHARACTERIZATION OF A CYCLIC BUTYLENE TEREPHTHALATE OLIGOMER RESIN FOR ELECTRICALLY AND THERMALLY CONDUCTIVE COMPOSITES SIMULTANEOUSLY REINFORCED WITH CONTINUOUS FIBER AND NANOCARBON FILLERS | 김성륜; 노예지 |
| 2019-03 | Application of supercritical water for green recycling of epoxy-based carbon fiber reinforced plastic | 박민; 정용채; 김재우; 양범주; 김영오; 김영남; 김성륜 |
| 2013-02 | Carbon Fiber Reinforced Composites | 김성륜 |
| 2015-11 | Carbon fiber-reinforced plastics based on epoxy resin toughened with core shell rubber impact modifiers | 박형철; 정하나; 유재상; 박민; 김성륜 |
| 2014-11 | Carbon Nanotube Mat Reinforced Thermoplastic Composites with a Polymerizable, Low-Viscosity Cyclic Butylene Terephthalate Matrix | 노예지; 김한상; 김성륜 |
| 2019-04 | Comprehensive study of effects of filler length on mechanical, electrical, and thermal properties of multi-walled carbon nanotube/polyamide 6 composites | 김재우; 김동우; 장한결; 조준용; 김윤상; 길명섭; 김성륜 |
| 2019-10 | Comprehensive study of effects of filler length on mechanical, electrical, and thermal properties of multi-walled carbon nanotube/polyamide 6 composites | 김재우; 장한결; 김성륜; 양범주; 길명섭 |
| 2014-04 | Design of microwave plasma and enhanced mechanical properties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabric | 이헌수; 김소영; 노예지; 김성륜 |
| 2013-02 | Design of Microwave Plasma and Enhanced Mechanical Property of Thermoplastic Composites Reinforced with the Microwave Plasma Treated Carbon Fiber Fabric | 김소영; 노예지; 김성륜; 이헌수 |
| 2017-04 | Edge Functionalized Graphene Reinforced Polyamide 6 Nanocomposites via In-Situ Anionic Ring-Opening Polymerization | 임순호; 김성륜; 조재현; 이혜성 |
| 2016-10 | Effect of Continuous Multi-Walled Carbon Nanotubes on Thermal and Mechanical Properties of Flexible Composite Film | 김성륜; 차지은; 이승희 |
| 2016-10 | Electrical and mechanical properties of flexible multi-walled carbon
nanotube/cyclic butylene terephthalate composite film | 김성륜; 차지은 |
| 2014-05 | Electrical behavior of MWCNTs/low-viscosity resin composite fabricated by using a solvent-free processing | 노예지; 김성륜; 윤재륜 |
| 2016-10 | Electrical conductivity of nano-compounds filled with highly
dispersed multi-walled carbon nanotube via in situ polymerization | 김성륜; 장지운 |
| 2021-06 | Electrical conductivity of polymer composites based on carbonized wood flour via plasma post-treatment as an effective and economical filler | 이헌수; 김우영; 장지운; 김성륜 |
| 2013-04 | Electrical properties of polyethylene composite films filled with nickel powder and short carbon fiber hybrid filler | V. S. Mironov; 김성륜; 박민 |
| 2018-05 | Electrically and Thermally Conductive Carbon Fibre Fabric Reinforced Polymer composites Based on Nanocarbons and an In-situ Polymerizable Cyclic Oligoester | 이헌수; 장지운; 박형철; 길명섭; 김성륜 |
| 2013-12 | Enhanced dispersion for electrical percolation behavior of multi-walled carbon nanotubes in polymer nanocomposites using simple powder mixing and in situ polymerization with surface treatment of the fillers | 노예지; 박성열; 황순형; 황준연; 김성륜; 윤재륜 |
| 2020-03 | Enhanced electrical conductivity of polymer nanocomposite based on edge-selectively functionalized graphene nanoplatelets | 양철민; 조재현; 성동기; 이두진; 김성륜; 이혜성; 남기호; 여현욱 |
| 2013-05 | Enhanced Electrical, Thermal and Mechanical Properties of Continuous Carbon Nanotube Mat Composite with Low Viscosity Thermoplastic resin | 노예지; 김성륜; 윤재륜 |
| 2012-06 | Enhanced thermally conductive composites based on polyphenylene sulfide, boron nitride and carbon nanotubes | 김형민; 김성륜; 박성열; 윤재륜 |
| 2019-04 | Environmentally friendly, highly efficient Epoxy-based Carbon Fiber Reinforced Plastic Green Recycling system using Supercritical water | 박민; 정용채; 김재우; 김영오; 김영남; 김성륜; 양범주 |
| 2019-10 | Facile and cost-effective strategy for fabrication of polyamide 6 wrapped multi-walled carbon nanotube via anionic melt polymerization of ε-caprolactam | 이헌수; 김재우; 장지운; 김성륜; 김성훈; 황인웅; 강병주; 강명구 |
| 2012-08 | Fiber Orientation and Warpage of Film Insert Molded Parts with Glass Fiber Reinforced Substrate | 김성륜; 김형민; 이두진; 윤재륜; 이성희 |
| 2019-02 | Flexible and coatable insulating silica aerogel/polyurethane composites via soft segment control | 양범주; 조재현; 장한결; 김성륜 |
| 2013-05 | High-Speed Fabrication of Carbon Fiber Fabric Composites with Low Viscosity Thermoplastic Polymer Resin | 노예지; 김성륜; 이헌수; 윤재륜 |
| 2014-05 | High-Speed Fabrication of Thermoplastic Carbon Fiber Fabric Composites with a Polymerizable, Low-Viscosity Cyclic Butylene Terephthalate Matrix for Automotive Applications | 노예지; 이성호; 김성륜; 윤재륜 |
