1996-01 | 3-dimensional analysis on the spray forming mechanism of billet. | 여동훈; 석현광; 오규환; 이호인; 나형용 |
1996-01 | 3-Dimensional forming model of rod in spray forming method | 이호인; 석현광; 여동훈; 오규환; 나현용 |
1995-06 | A comparison of experimental measurements of V λ **2 with an analytic model of eutectic growth in the Al-Al//2Cu system. | 김기배; 윤의박; 이호인 |
2005-10 | A Study on Degradation of PEMFC during a Non-Humidified Operation | 하정기; 조은애; 김형준; 이상엽; 임태훈; 오인환; 이호인 |
1995-01 | A study on plate forming model in spray forming precess. | 석현광; 여동훈; 오규환; 나형용; 이호인 |
1997-08 | A study on the fabrication process and melt infiltration of salt core in squeeze casting method | 김기배; 노상우; 이호인; 남태운 |
1990-09 | A study on the formation of the quasicrystals in rapidly solidified Al-Li Alloys. | 김도향; 이호인; B. Cantor |
1998-04 | A study on the method to reduce the deactivation of catalyst by improving the internal system of DIR-MCFC | 문형대; 하흥용; 임태훈; 홍성안; 이호인 |
1991-08 | A study on the microstructural characteristics of rapidly solidified Al-Fe alloys(I): solidification microstructure and phase analysis. | 김도향; 이호인 |
1991-09 | A study on the microstructural characteristics of rapidly solidified Al-Fe alloys(Ⅱ): quasicrystalline and related crystalline phase. | 김도향; 이호인 |
1991-12 | A study on the microstructure and mechanical properties of the Mg-xLi-1Al(x=4,9,16) alloys. | 김도향; 한요섭; 이호인 |
1992-11 | A study on the microstructure of spray formed Al-Fe alloys | 오규환; 김원태; 이호인 |
1999-12 | A study on the microstructures and mechanical properties of squeeze cast high strength yellow brass, Al bronze and Sn bronze alloys | 한요섭; 이호인 |
1999-04 | A study on the poisoning of the catalyst Ni/MgO in the reaction of steam reforming by the alkali carbonate vapor in DIR-MCFC | 문형대; 하흥용; 임태훈; 홍성안; 이호인 |
1997-10 | A study on the rheological characteristics of Al alloy by mechanical stirring | 고영진; 윤의박; 이재철; 이호인 |
1996-01 | A study on the shape control of billet in spray forming method. | 석현광; 오규환; 신돈수; 이호인; 나형용 |
1992-01 | A study on the wettability of the Al-Li / SiC interface | 김기배; 김도향; 이호인 |
1998-03 | A three-dimensional model of the spray forming method | 석현광; 여동훈; 오규환; 이호인; 나형용 |
1991-12 | A transmission electron microscopic study on the microstructural characteristics of the Mg-Li-Al alloys. | 김도향; 한요섭; 이호인 |
1991-08 | Acceleration of aging kinetics in SiCw reinforced Al-Cu-Mg metal matrix composites | 김태수; 오규환; 이호인; 김한식 |
2005-06 | Acid doped polybenzimidazole (PBI) as a catalyst binder for high temperature polymer electrolyte fuel cell operations | 김정희; 정성욱; 김형준; 조은애; 하흥용; 임태훈; 오인환; 홍성안; 이호인 |
1990-01 | Al-Fe 합금의 조직과 고온변형특성 . | 이호인; 전정식; 한형기; 유연철 |
1998-01 | Alloy design and processing of thixoformable wrought Al alloy composites reinforced with SiC | 이재철; 이호인; 신돈수 |
1999-01 | Alloy design of thixoformable wrought SiC/Al alloy composites | 이재철; 석현광; 이호인 |
1997-01 | Alloy design of thixoformable wrought SiC/Al alloys composites | 이재철; 변지영; 오창석; 이호인 |
2001-11 | Analyses of the deformation history during equal channel angular pressing | 석현광; 서진유; 이호인; 이재철 |
1991-01 | Bi/MnBi 공정합금의 일방향응고조직 및 자기적 특성에 관한 연구 . | 김기배; 이호인; 윤의박; 조순형; 심진섭; 박종완; 나형용 |
1997-03 | Characterisation of interfacial reaction in (Al//2O//3)//p/6061 Al composite | 이재철; 이호인; 김긍호 |
1996-01 | Characterization of interfacial reaction in (Al//2O//3)//p/6061 Al composite. | 이재철; 김긍호; 이정일; 이호인 |
1997-01 | Characterization of interfacial reaction in (Al203)//p/6061 aluminium alloy composite | 이재철; 김긍호; 이호인 |