2006-12 | A method of pipe joining using shape memory alloys | 지광구; 한준현; 장우양 |
2007-02 | Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching (RIE) | 이욱제; 김윤배; 이우영; 한승희; 한준현; 지광구 |
1981-02 | Anomalous mechanical behavior in Mn-15Cu-2Ni-3Cr alloy. | 신명철; 지광구; P. L. Potapov; S. Y. Song |
1999-02-12 | B, Zr의 복합첨가에 의한 결정립 미세화가 이루어진 합금강 | 박종우; 정우상; 정원용; 지광구 |
2005-09 | Chemical vapor deposition of nitride film on Fe-based powder | 한준현; 김태훈; 윤진국; 지광구; 김광윤 |
2002-01 | Continuous ECA process for microstructure control of steel plate | 박종우; 정영훈; 지광구; 김진원 |
2003-08 | Crystallographic evolution in aluminum single crystal during in-situ tensile deformation. | 한준현; Dong-Ik Kim; 지광구; 오규환 |
2016-12 | Cyclic Fatigue Resistance, Torsional Resistance, and Metallurgical Characteristics of V Taper 2 and V Taper 2H Rotary NiTi Files | 지광구; 김유찬; S. W. CHANG; K. S. SHIM; Q. ZHU; H. PERINPANAYAGAM; K. Y. KUM |
1994-01 | Damping capacity in Fe-27Mn-3.5Si alloy. | 신명철; 지광구; K. Ito |
1997-01 | Damping capacity in Fe-Mn based alloys | 지광구; W.Y. Jang; S.H. Baik; M.C. Shin; C.S. Choi |
1999-12 | Damping mechanism and application of Fe-Mn based alloys | 지광구; 장우양; 백승한; 신명철 |
2004-10 | Deformation Behavior Analysis in ECAP Using arbitrary Lagrangian-Eulerian Formulation | 한준현; 장형준; 윤진국; 지광구; 박종우; 오규환 |
2003-08 | Effect of accumulative strain on the texture evolution in 1050 Al alloys processed by continuous confined strip shearing. | 한준현; 오규환; 지광구 |
2002-04 | Effect of betatizing on grain growth and transtormation characteristics of a CuAlNi SMA ribbon with fiber structre | 장우양; 이영수; 지광구; 이은구 |
2003-11 | Effect of betatizing time on the grain growth and transformation characteristics in rapid-solidified Cu-12.7Al-3.9Ni based SMA ribbons with different solidification structures | 장우양; 지광구; 이영수 |
1995-12 | Effect of carbon content and cold working on damping capacity and mechanical property of Fe-17wt%Mn martensitic alloy. | 신명철; S. H. Baik; J. C. Kim; 지광구; C. S. Choi |
2013-12 | Effect of change in coil orientation for SMA spring | K. E. Kim; J. H. Han; Y. M. Sung; 지광구; W. Y. Jang |
2006-06 | Effect of grain size on amount of deformation-induced epsilon martensite and shape memory effect in Fe-Mn alloy | 지광구; 한준현; 김윤배; 장우양 |
2012-03 | Effect of Grain Size on the Shape Recovery in a Melt-spun
Fe-24%Mn-4%Si-5%Cr-5%Co SMA Ribbon | 김형준; 지광구; 강후원; 이종국; 양권승; 장우양 |
2013-11 | Effect of heat treatment on cyclic fatigue resistance, thermal behavior and microstructures of K3 NiTi rotary instruments | 장석우; 김유찬; 장혜정; 지광구; Qiang Zhu; Kamran Safavi; 손원준; 배광식; Larz Sw Spangberg; 금기연 |
2004-12 | Effect of Heat Treatment Temperature on Amount of Stress-Induced e Martensite in an Fe-Mn Alloy | 지광구; 한준현; 장우양 |
2008-05 | Effect of heat treatment temperature on oxidation behavior in Ni-Ti alloy | 김규석; 지광구; 김완철; 장우양; 한승희 |
2006-12 | Effect of Microstructure on Martensitic Transformation and Cyclic Deformation Characteristics in a Cu-Al-Ni Based Alloy with Unidirectional Solidified Structure | 양권승; 김근형; Kabilan M; 지광구; 장우양 |
1998-06 | Effect of microstructure on shape memory effect and transformation behavior in an Fe-32Mn-6.5Si alloy | 이지영; 지광구; 최종술; 장우양; 신명철 |
2002-04 | Effect of microstructure on shape-memory effect in Fe-32Mn-6.5Si alloy | 지광구; 장우양; 정영훈; 신명철 |
2008-01 | Effect of oxidation on transformation and deformation behavior in Ni-Ti alloy | 김규석; 지광구; 김윤배; 장우양; 한승희 |
1996-01 | Effects of carbon content and titanium addition on damping capacity in Fe-17wt%Mn alloy. | 백승한; 김정철; 지광구; 신명철; 최종술 |
2012-10 | Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites | 임준영; 오세일; 김유찬; 지광구; 성윤모; 한준현 |
1995-07 | Effects of copper addition on damping capacities, atmospheric corrosion and mechanical properties Fe-17wt%Mn of alloy. | 지광구; 백승한; 김정철; 최종술 |
2009-06 | Effects of Die Geometry on Variation of the Deformation Rate in Equal Channel Angular Pressing | 한준현; 지광구; 장형준; 오규환 |