2002-10-24 | A stabilized NiO cathode prepared by sol-impregnation of LiCoO2 precursors for molten carbonate fuel cells | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA; Lim, HC |
2004-08-15 | A study on the chemical stability and electrode performance of modified NiO cathodes for molten carbonate fuel cells | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA |
2003-03-27 | Characteristics of cathodic polarization at Pt/YSZ interface without the effect of electrode microstructure | Yoon, SP; Nam, SW; Kim, SG; Hong, SA; Hyun, SH |
2005-01-10 | Development of nanophase CeO2-Pt/C cathode catalyst for direct methanol fuel cell | Yu, HB; Kim, JH; Lee, HI; Scibioh, MA; Lee, J; Han, J; Yoon, SP; Ha, HY |
2004-10-05 | Dissolution behavior of Co-coated NiO cathode in molten (Li0.62K0.38)(2)CO3 eutectics | Ryu, BH; Han, J; Yoon, SP; Nam, SW; Lim, TH; Hong, SA; Kim, KB |
2004-01 | Effect of electrode microstructure on gas-phase diffusion in solid oxide fuel cells | Yoon, SP; Nam, SW; Han, J; Lim, TH; Hong, SA; Hyun, SH |
1996-06 | Effect of the structural changes of the Ni-Cr anode on the molten carbonate fuel cell performance | Oh, IH; Yoon, SP; Lim, TH; Nam, SW; Hong, Seong Ahn; Lim, Hee Chun |
2002-07-20 | Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method | Kim, SG; Yoon, SP; Nam, SW; Hyun, SH; Hong, SA |
2005-01 | Fabrication of an anode-supported SOFC with a sol-gel coating method for a mixed-gas fuel cell | Vo, NXP; Yoon, SP; Nam, SW; Han, J; Lim, TH; Hong, SA |
2001-06 | Improved performance of La0.85Sr0.15MnO3 cathodes by sol-gel coatings | Yoon, SP; Nam, SW; Lim, TH; Han, J; Hong, SA |
2004-09-10 | Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuel | Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA |
2004-11-15 | In situ oxidation/lithiation of Ni-Co alloy in the molten Li-0.62/K-0.38 carbonates eutectics | Ryu, BH; Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA; Kim, KB |
2002-07-20 | Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA |
2000-05 | Methane steam reforming in a Pd-Ru membrane reactor | Nam, SW; Yoon, SP; Ha, HY; Hong, SA; Maganyuk, AP |
2002-04-01 | Performance of anode-supported solid oxide fuel cell with La0.85Sr0.15MnO3 cathode modified by sol-gel coating technique | Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Yoo, YS; Lim, HC |
2002-04-01 | Performance of LiCoO2-coated NiO cathode under pressurized conditions | Han, J; Kim, SG; Yoon, SP; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Lim, HC |
2003-11 | Preparation of YSZ coated AISI-type 316L stainless steel by the sol-gel coating method and its corrosion behavior in molten carbonate | Kim, SG; Hong, MZ; Yoon, SP; Han, JH; Nam, SW; Lim, TH; Hong, SA |
2004-04-15 | Sol-gel processing of yttria-stabilized zirconia films derived from the zirconium n-butoxide-acetic acid-nitric acid-water-isopropanol system | Kim, SG; Nam, SW; Yoon, SP; Hyun, SH; Han, J; Lim, TH; Hong, SA |