2006-12 | Nonthermal starch hydrolysis using ultra high pressure: I. Effects of acids and starch concentrations | Lee, Jae-Hwang; Choi, Hyun-Wook; Kim, Byung-Yong; Chung, Myong-Soo; Kim, Dong-Seob; Choi, Sung Won; Lee, Dong-Un; Park, Seok-Jun; Hur, Nam-Yoon; Baik, Moo-Yeol |
2006-12 | Cationic Surfactants for the control of overfill bumps in Cu superfilling | Kim, S. -K.; Josell, D.; Moffat, T. P. |
2006-12 | Improvement of the thermal and chemical stability of Al doped ZnO films | Kim, I. H.; Ku, D. Y.; Ko, J. H.; Kim, D.; Lee, K. S.; Jeong, J. -H.; Lee, T. S.; Cheong, B.; Baik, Y. -J.; Kim, W. M. |
2006-12 | Formation of FeMo2B2 phase in boron containing 9Cr-1.5Mo ferritic steels | Jung Woo-Sang; Hong Suk-Woo; Song Sang-Min; Kwun, Sook-In; Chung Soon-Hyo |
2006-12 | Relaxor Ferroelectric Polymer-ceramic Composites for High Energy Density Capacitor Applications | Jeong, Dae-Yong; Yoon, Seok-Jin |
2006-12 | Co-planar type single chamber solid oxide fuel cell with micro-patterned electrodes | Ahn, Sung-Jin; Kim, Yong-Bum; Moon, Jooho; Lee, Jong-Ho; Kim, Joosun |
2006-12 | Selective growth of znic oxide nanowires on the metal electrodes | Choi, Young-Jin; Park, Jae-Hwan; Park, Jae-Gwan |
2006-12 | Energy harvesting MEMS device based on thin film piezoelectric cantilevers | Choi, W. J.; Jeon, Y.; Jeong, J. -H.; Sood, R.; Kim, S. G. |
2006-12 | Synthesis of nanocomposites of PMN-PT-BT with metal oxides via surface modification | Han, Kyoung R.; Park, Soyoung; Kwon, Young-Soon; Kim, Chang Sam |
2006-12 | Improvement of communication reliability of small UAV by a tapered stacked antenna | Kim, Duck-Hwan; Lee, Kyu-Hwan; Kim, Young-Sik |
2006-12 | Electrochemical characteristics of silicon-metals coated graphites for anode materials of lithium secondary batteries | Kim, In-Chul; Byun, Dongjin; Lee, Joong Kee |
2006-12 | Effects of growth temperature on exciton lifetime and structural properties of ZnO films on sapphire substrate | Cho, S.; Kim, S. I.; Kim, Y. H.; Mickevicius, J.; Tamulaitis, G.; Shur, M. S. |
2006-12 | The effect of ammonium sulfide treatment on interfacial properties in ZnS/HgCdTe heterostructure | Jung, Yong-Chul; Yoon, Seok-Jin; Suh, Sang-Hee; Kim, Jin-Sang |
2006-12 | Growth and magnetic properties of Mn and MnSn-doped ZnO nanorods | Baranov, A. N.; Panin, G. N.; Yoshimura, Masahiro; Oh, Young-Jei |
2006-12 | Selective growth of ZnO nanorods by patterning of sol-gel-derived thin film | Kwon, S. Joon; Park, Jae-Hwan; Park, Jae-Gwan |
2006-12 | Constructions and characteristics of a tiny piezoelectric linear motor using radial mode vibrations | Ko, Hyun-Phill; Kang, Chong-Yun; Kim, Jin-Sang; Borodin, Serigey N.; Kim, Sangsig; Yoon, Seok-Jin |
2006-12 | Adaptive accommodation control method for complex assembly | Kang, Sungchul; Kim, Munsang; Park, Shinsuk |
2006-12 | Biomechanical testing of hybrid hamstring graft tibial fixation in anterior cruciate ligament reconstruction | Yoo, Jae Chul; Ahn, Jin Hwan; Kim, Jae Hoon; Kim, Byung Kwan; Choi, Kui Won; Bae, Tae Soo; Lee, Chang Yang |
2006-12 | Microwave slot transmission lines based on ferroelectric films tunable through low bias voltage | Mironenko, I. G.; Kang, Chong-Yun; Karmanenko, S. F.; Ivanov, A. A.; Semenov, A. A.; Sinjukova, O. V. |
2006-12 | Thickness dependent ferroelectric properties of BSTO thin films deposited by RF magnetron sputtering | Ha, Jong-Yoon; Choi, Ji-Won; Kang, Chong-Yun; Karmanenko, S. F.; Choi, Doo Jin; Yoon, Seok-Jin; Kim, Hyun-Jai |