| 2007-11 | Origin of the plasticity in bulk amorphous alloys | Lee, Jae-Chul; Park, Kyoung-Won; Kim, Kyou-Hyun; Fleury, Eric; Lee, Byeong-Joo; Wakeda, Masato; Shibutani, Yoji |
| 2007-10 | Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation | Zhao, Manhong; Chen, Xi; Xiang, Yong; Vlassak, Joost J.; Lee, Dongyun; Ogasawara, Nagahisa; Chiba, Norimasa; Gan, Yong X. |
| 2007-11 | Improved lateral force calibration based on the angle conversion factor in atomic force microscopy | Choi, Dukhyun; Hwang, Woonbong; Yoon, Euisung |
| 2007-03-25 | Studies on hydrogen embrittlement in Zr- and Ni-based amorphous alloys | Jayalakshmi, S.; Park, S. O.; Kim, K. B.; Fleury, E.; Kim, D. H. |
| 2007-02 | Oxidation of Ti3SiC2 between 900 and 1200 degrees C in air | Lee, D. B.; Park, S. W. |
| 2007-07 | Tribochemical interactions of Si-doped DLC film against steel in sliding contact | Pham, Duc-Cuong; Ahn, Hyo-Sok; Oh, Jae-Eung; Yoon, Eui-Sung |
| 2007-02 | Hydrogen-induced amorphization and embrittlement resistance in Ti-based in situ composite with bcc-phase in an amorphous matrix | Jayalakshmi, S.; Ahn, J. P.; Kim, K. B.; Fleury, E. |
| 2007-02 | Design of a bulk amorphous alloy containing Cu-Zr with simultaneous improvement in glass-forming ability and plasticity | Lee, Seok-Woo; Lee, Sang-Chul; Kim, Yu-Chan; Fleury, E.; Lee, Jae-Chul |
| 2007-12 | The deposition behavior of SiC : H films deposited using a remote PECVD system with an HMWS precursor and C2H2 dilution gas | Cho, Sung Hyuk; Lee, Young Jin; Choi, Doo Jin; Kim, Tae Song |
| 2007-09 | Plain-strain bulge test for nanocrystalline copper thin films | Wei, Xiaoding; Lee, Dongyun; Shim, Sanghoon; Chen, Xi; Kysar, Jeffrey W. |
