Full metadata record

DC Field Value Language
dc.contributor.authorLee, Jae Hyeon-
dc.contributor.authorKang, Wangu-
dc.contributor.authorChung, Hong Keun-
dc.contributor.authorKim, Seong Keun-
dc.contributor.authorHan, Jeong Hwan-
dc.date.accessioned2024-01-19T08:00:28Z-
dc.date.available2024-01-19T08:00:28Z-
dc.date.created2023-12-28-
dc.date.issued2024-02-
dc.identifier.issn0042-207X-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/112942-
dc.description.abstractMolybdenum dioxide (MoO2) has recently garnered attention as a promising oxide electrode for next-generation dynamic random-access memory capacitors owing to its high work function, low resistivity, and good thermal stability. The formation of pure, reliable MoO2 films is a significant challenge because of their higher formation energy than that of non-conductive orthorhombic molybdenum trioxide (MoO3). Herein, we investigated the controlled growth of MoO2 films by manipulating the process pressure and oxygen-to-argon (O2/Ar) ratio using radio frequency reactive magnetron sputtering. By increasing the O2/Ar ratio at a fixed process pressure (pp), sputtered MoOx films were fabricated as metallic Mo, monoclinic MoO2, and orthorhombic MoO3. The MoO2 film with Mo/O atomic ratio of 0.5 was achieved in the narrow process window of O2/Ar ratio of 0.22 and pp = 3 mtorr. The MoO2 films exhibited a smooth surface morphology with a root mean square roughness of 0.34-0.68 nm. The resistivity of MoO2 film was 972 mu omega cm, which was decreased to 374-524 mu omega cm by rapid thermal annealing in N2 at 600 degrees C-800 degrees C. The phase-controlled MoO2 electrode led to the in-situ crystallization of high-k rutile TiO2 with a dielectric constant of 93 via local epitaxial growth. This might be attributed to the excellent coherence in the atomic arrangement and low lattice mismatch between the distorted rutile MoO2 (011) and rutile TiO2 (110) planes.-
dc.languageEnglish-
dc.publisherPergamon Press Ltd.-
dc.titlePhase-controlled molybdenum dioxide electrodes by RF reactive magnetron sputtering for achieving high-k rutile TiO2 dielectric-
dc.typeArticle-
dc.identifier.doi10.1016/j.vacuum.2023.112776-
dc.description.journalClass1-
dc.identifier.bibliographicCitationVacuum, v.220-
dc.citation.titleVacuum-
dc.citation.volume220-
dc.description.isOpenAccessN-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid001119328200001-
dc.identifier.scopusid2-s2.0-85177168495-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryPhysics, Applied-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaPhysics-
dc.type.docTypeArticle-
dc.subject.keywordPlusWORK-FUNCTION-
dc.subject.keywordPlusTHIN-FILMS-
dc.subject.keywordPlusGROWTH-
dc.subject.keywordPlusOXIDE-
dc.subject.keywordPlusOXYGEN-
dc.subject.keywordPlusSTATE-
dc.subject.keywordAuthorMoO2-
dc.subject.keywordAuthorElectrode-
dc.subject.keywordAuthorRF sputtering-
dc.subject.keywordAuthorProcess pressure-
dc.subject.keywordAuthorOxygen-to-Argon ratio-
dc.subject.keywordAuthorHigh-k dielectric-
Appears in Collections:
KIST Article > 2024
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE