Full metadata record

DC Field Value Language
dc.contributor.authorZhou, Chongjian-
dc.contributor.authorLee, Yong Kyu-
dc.contributor.authorYu, Yuan-
dc.contributor.authorByun, Sejin-
dc.contributor.authorLuo, Zhong-Zhen-
dc.contributor.authorLee, Hyungseok-
dc.contributor.authorGe, Bangzhi-
dc.contributor.authorLee, Yea-Lee-
dc.contributor.authorChen, Xinqi-
dc.contributor.authorLee, Ji Yeong-
dc.contributor.authorCojocaru-Miredin, Oana-
dc.contributor.authorChang, Hyunju-
dc.contributor.authorIm, Jino-
dc.contributor.authorCho, Sung-Pyo-
dc.contributor.authorWuttig, Matthias-
dc.contributor.authorDravid, Vinayak P.-
dc.contributor.authorKanatzidis, Mercouri G.-
dc.contributor.authorChung, In-
dc.date.accessioned2024-01-19T13:34:11Z-
dc.date.available2024-01-19T13:34:11Z-
dc.date.created2021-10-21-
dc.date.issued2021-10-
dc.identifier.issn1476-1122-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/116350-
dc.description.abstractThermoelectric materials generate electric energy from waste heat, with conversion efficiency governed by the dimensionless figure of merit, ZT. Single-crystal tin selenide (SnSe) was discovered to exhibit a high ZT of roughly 2.2-2.6 at 913 K, but more practical and deployable polycrystal versions of the same compound suffer from much poorer overall ZT, thereby thwarting prospects for cost-effective lead-free thermoelectrics. The poor polycrystal bulk performance is attributed to traces of tin oxides covering the surface of SnSe powders, which increases thermal conductivity, reduces electrical conductivity and thereby reduces ZT. Here, we report that hole-doped SnSe polycrystalline samples with reagents carefully purified and tin oxides removed exhibit an ZT of roughly 3.1 at 783 K. Its lattice thermal conductivity is ultralow at roughly 0.07 W m(-1) K-1 at 783 K, lower than the single crystals. The path to ultrahigh thermoelectric performance in polycrystalline samples is the proper removal of the deleterious thermally conductive oxides from the surface of SnSe grains. These results could open an era of high-performance practical thermoelectrics from this high-performance material. SnSe has a very high thermoelectric figure of merit ZT, but uncommonly polycrystalline samples have higher lattice thermal conductivity than single crystals. Here, by controlling Sn reagent purity and removing SnOx impurities, a lower thermal conductivity is achieved, enabling ZT of 3.1 at 783 K.-
dc.languageEnglish-
dc.publisherNature Publishing Group-
dc.titlePolycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal-
dc.typeArticle-
dc.identifier.doi10.1038/s41563-021-01064-6-
dc.description.journalClass1-
dc.identifier.bibliographicCitationNature Materials, v.20, no.10, pp.1378 - 1384-
dc.citation.titleNature Materials-
dc.citation.volume20-
dc.citation.number10-
dc.citation.startPage1378-
dc.citation.endPage1384-
dc.description.isOpenAccessY-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid000680338900002-
dc.identifier.scopusid2-s2.0-85111840957-
dc.relation.journalWebOfScienceCategoryChemistry, Physical-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryPhysics, Applied-
dc.relation.journalWebOfScienceCategoryPhysics, Condensed Matter-
dc.relation.journalResearchAreaChemistry-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaPhysics-
dc.type.docTypeArticle; Early Access-
dc.subject.keywordPlusULTRALOW THERMAL-CONDUCTIVITY-
dc.subject.keywordPlusPERFORMANCE-
dc.subject.keywordPlusCHARGE-
dc.subject.keywordPlusHEAT-
Appears in Collections:
KIST Article > 2021
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE