Full metadata record

DC Field Value Language
dc.contributor.authorPark, Dae-Bum-
dc.contributor.authorHuh, Moo-Young-
dc.contributor.authorJung, Woo-Sang-
dc.contributor.authorSuh, Jin-Yoo-
dc.contributor.authorShim, Jae-Hyeok-
dc.contributor.authorLee, Seung-Cheol-
dc.date.accessioned2024-01-20T11:30:17Z-
dc.date.available2024-01-20T11:30:17Z-
dc.date.created2021-09-05-
dc.date.issued2013-10-15-
dc.identifier.issn0925-8388-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/127544-
dc.description.abstractThe effect of vanadium addition on the creep property of niobium-containing 18Cr-9Ni austenitic heat-resistant steel was studied. After solution treatment, the MX precipitates of vanadium-free steel contained Nb only. On the contrary, high Nb and low V contents were detected from the MX precipitates in the steel with 0.3 wt% of vanadium. Vanadium-rich MX carbo-nitride was not observed in the matrix and at the grain boundaries after solution treatment. The vanadium precipitated as a form of Z-phase during early-stage creep deformation was attributed to the improvement in creep strength at 700 degrees C with applied stress higher than 150 MPa. And metallic Cu precipitates were confirmed in the nanometer scale using TEM and EDS technique. The Cu precipitates are believed to contribute to the strengthening of austenitic heat resistant steel independently. The precipitation behavior is discussed using transmission electron microscopy and thermo-kinetics simulation technique. (C) 2013 Elsevier B.V. All rights reserved.-
dc.languageEnglish-
dc.publisherELSEVIER SCIENCE SA-
dc.subjectZ-PHASE-FORMATION-
dc.subjectLONG-TERM CREEP-
dc.subjectHIGH-TEMPERATURES-
dc.subjectPOWER-PLANTS-
dc.subjectCARBONITRIDE-
dc.subjectEVOLUTION-
dc.subjectSTRENGTH-
dc.subjectKINETICS-
dc.subjectSYSTEMS-
dc.titleEffect of vanadium addition on the creep resistance of 18Cr9Ni3CuNbN austenitic stainless heat resistant steel-
dc.typeArticle-
dc.identifier.doi10.1016/j.jallcom.2013.05.106-
dc.description.journalClass1-
dc.identifier.bibliographicCitationJOURNAL OF ALLOYS AND COMPOUNDS, v.574, pp.532 - 538-
dc.citation.titleJOURNAL OF ALLOYS AND COMPOUNDS-
dc.citation.volume574-
dc.citation.startPage532-
dc.citation.endPage538-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid000321749600086-
dc.identifier.scopusid2-s2.0-84879235922-
dc.relation.journalWebOfScienceCategoryChemistry, Physical-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryMetallurgy & Metallurgical Engineering-
dc.relation.journalResearchAreaChemistry-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaMetallurgy & Metallurgical Engineering-
dc.type.docTypeArticle-
dc.subject.keywordPlusZ-PHASE-FORMATION-
dc.subject.keywordPlusLONG-TERM CREEP-
dc.subject.keywordPlusHIGH-TEMPERATURES-
dc.subject.keywordPlusPOWER-PLANTS-
dc.subject.keywordPlusCARBONITRIDE-
dc.subject.keywordPlusEVOLUTION-
dc.subject.keywordPlusSTRENGTH-
dc.subject.keywordPlusKINETICS-
dc.subject.keywordPlusSYSTEMS-
dc.subject.keywordAuthorAustenitic stainless steel-
dc.subject.keywordAuthorZ-phase-
dc.subject.keywordAuthorCreep strength-
Appears in Collections:
KIST Article > 2013
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE