Intermediate Temperature Fuel Cell and Oxygen Reduction Studies With Carbon-Supported Platinum Alloy Catalysts in Phosphoric Acid Based Systems

Authors
Mamlouk, MohamedJang, Jong HyunScott, Keith
Issue Date
2012-02
Publisher
ASME
Citation
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v.9, no.1
Abstract
The oxygen reduction activities of platinum and platinum alloy catalysts were evaluated at temperatures up to 150 degrees C in phosphoric acid solution. The oxygen reduction currents and open circuit potentials were measured using chronoamperometry with double potential steps to eliminate the effects of double layer charging currents and metal deactivationcould be eliminated effectively. Based on the mass activity at 0.7 V versus Ag/AgCl, the commercial PtNi catalyst showed higher performances than commercial Pt catalyst at 150 degrees C. The commercial PtCo catalyst showed high activities at 90 degrees C and 120 degrees C. Intermediate temperature fuel cells based on phosphoric acid doped polybenzimidazole membranes were tested with the alloy cathode catalysts. In the case of Pt-Fe alloy an enhanced performance was achieved in comparison to that with Pt carbon catalysts. DOI: 10.1115/1.4004461]
Keywords
POLYMER ELECTROLYTE MEMBRANE; PT-CO ALLOYS; DOPED POLYBENZIMIDAZOLE; MICROEMULSION METHOD; PARTICLE-SIZE; ELECTROCATALYSTS; PERFORMANCE; SURFACE; FE; NI; POLYMER ELECTROLYTE MEMBRANE; PT-CO ALLOYS; DOPED POLYBENZIMIDAZOLE; MICROEMULSION METHOD; PARTICLE-SIZE; ELECTROCATALYSTS; PERFORMANCE; SURFACE; FE; NI; phosphoric acid; polybenzimidazole; PBI; Pt alloy; electrocatalyst; oxygen reduction; PEMFC; fuel cell
ISSN
1550-624X
URI
https://pubs.kist.re.kr/handle/201004/129596
DOI
10.1115/1.4004461
Appears in Collections:
KIST Article > 2012
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE