| 1989-01 | Thermal decomposition of acebutolol during GLC analysis and its quantitation using an on-column injection technique | 신호상; 노동석; 박종세 |
| 1989-01 | 상품화된 표면분석기술의 종류 . | 금동화 |
| 1989-01 | 침전법으로 제조한 Ni/SiO//2 촉매에서 규산니켈의 생성에 따른 촉매의 특성변화 . | 서동진; 임태훈; 문상흡; 정종식 |
| 1989-01 | Structure and Properties of Rapidly-Solidified Al-Pb Monotectic Alloys - 1. Characteristics of Rapidly-Solidified Microstructure | 김명호; 배차권; 이호인 |
| 1989-01 | A synthesis and characteristics for zirconia powders by coprecipitation method : III) the properties and sinterabilities of ZrO₂-Y₂O₃-Bi₂O₃ | 오영제; 윤종석; 이희수; 이동인 |
| 1989-01 | 물 - 경유 유화연료 액적의 연소특성에 관한 연구 | 정종수; 신현동 |
| 1989-01 | Cross-reacting and specific antigenic components in cystic fluid from metacestodes of Echinococcus granulosus and Taenia solium | 공윤; Kang, S.Y.; Cho, S.Y.; Min, D.Y. |
| 1989-01 | The kinetics of reduction of iron oxide from molten slag | 김원목; G. Graenzdoerffer; H.Alan. Fine |
| 1989-01 | Studies of the time dependent electrical conductivity of rutile single crystal = Studio della conduttivita` elettrica in funzione del tempo di un monocristallo di rutilo | 김병국; 박순자; M. Igarashi |
| 1989-01 | The effect of TMT on fatigue crack propagation in 7050 Al alloy. | 정영훈; 조준식; 권숙인; 이용연 |
| 1989-01 | Optimization of valve events in a 4 cycle reciprocating engine using measured intake and exhaust port pressures. | 정재화; 오세종; 진영옥 |
| 1989-01 | Measurement of zipeprol in rat plasma by gas chromatography with nitrogen-phosphorus detection | 신호상; 박종세; 노동석; 김옥남 |
| 1989-01 | Further studies of cluster-bound imido ligands, imido-acyl coupling and promotion of the formation and carbonylation of imido ligands by halides. | 한성환; Jeong-Sup Song; Gregory L. Geoffroy; Sonbinh T. Nguyen; Phillip D. Macklin; Arnold L. Rheingold |
| 1989-01 | Bayesian feedback method for optimum phenytoin dosing | 신재국; 이선희; 신상구; 박찬웅; 노재규; 이광우; 명호진; 김진규 |
| 1989-01 | Antibody changes in paragonimiasis patients after praziquantel treatment as obsserved by ELISA and immunoblot. | Cho, S.Y.; Kim, S.I.; Kang, S.Y.; 공윤; Han, S.K.; Shim, Y.S.; Han, Y.C. |
| 1989-01 | Reliability analysis of statistical failure probability in Sin/Hip Si//3N//4. | 유영혁; 이준근; 이재석 |
| 1989-01 | Design of the heat dissipation rate of automotive radiation (I) Analysis of heat dissipation. | 정종수; 이춘식 |
| 1989-01 | Brake fluids and silicones. | 정일남; 이명의 |
| 1989-01 | 급속응고 박판주조기술 . | 한요섭; 이호인 |
| 1989-01 | 실리콘질화박막 (SiNx) 성장을 위한 하향흐름 마이크로 웨이브 플라즈마의 특성 분석 . | 김용태; 김춘근; 민석기 |
