| - | HOMOGENEOUS FLOW RATE AND THE PLASTICITY OF ANNEALED AMORPHOUS ALLOYS | Park Kyoung Won; 이창면; Eric Fleury; 이병주; Yoji Shibutani; Michael L. Falk; 이재철 |
| 1999-11 | Interfacial phenomena in the SiC/2014Al composite : (I) Modification of interfacial characteristics | 이재철; 안재평; 시충량; 이호인 |
| 2000-02 | Interfacial phenomena in the SiC/2014Al composite : tailoring the interfaces | 이재철; 안재평; 심재혁; 석현광; 이호인 |
| 1996-01 | Interfacial reactions in squeeze cast (Saffil+C)/AC2B Al composite. | 이재철; 이정일; 김기배; 이호인 |
| 2000-11 | Macroscopic heat transfer model in electric arc spray forming of low carbon steel ring | 석현광; 이재철; P.S. Grant; 이호인 |
| 2000-11 | Material properties of the short fiber reinforced Al alloy composite I : Effect of the sintering temperature | 하용식; 김도향; 김성철; 이호인; 이재철 |
| 2000-11 | Material properties of the short fiber reinforced Al alloy composite II : Effect of the interfacial reaction | 석현광; 하용식; 이호인; 이재철 |
| 1997-01 | Measurement of dynamic elastic constants and their applications | 이재철; 김영만; 이호인 |
| 2001-05 | Methodologies to design the interfaces in SiC/Al composites | 이재철 |
| 1998-10 | Microstructural evolutions in hypereutectic Al-Si alloy during spray forming and extrusion | 김상균; 석현광; 이재철; 이호인; 신돈수; 나형용 |
| 1996-01 | Observation of interfacial reaction products in SiC//p/Al composites and their characterizations. | 이재철; 이정일; 이호인 |
| 1998-06 | Optimization of initial process parameter in spray forming (I) : control of the initial melt temperature | 이재철; 석현광; 신돈수; 이호인 |
| - | Paradoxical phenomena between the homogeneous and inhomogeneous deformation of bulk amorphous alloys | Park Kyoung Won; Eric Fleury; Michael L. Falk; 이재철 |
| - | Paradoxical phenomena between the homogeneous and inhomogeneous deformation of bulk amorphous alloys | Park Kyoung Won; Eric Fleury; Michael L. Falk; 이재철 |
| 1996-01 | Phase identification of the interfacial reaction product of SiC//p/Al composite using convergent beam electron diffraction technique. | 이정일; 이재철; 석현광; 이호인 |
| - | Plasticity criterion of bulk amorphous alloys : homogeneous flow rate | Park Kyoung Won; Eric Fleury; 이재철 |
| - | Plasticity criterion of bulk amorphous alloys : homogeneous flow rate | Park Kyoung Won; Eric Fleury; 이재철 |
| - | Plasticity of amorphous alloys assessed by their homogeneous flow rate | Park Kyoung Won; 이창면; Eric Fleury; 이재철 |
| 1997-01 | Recent R&D trend in thixoforming process | 이재철; 이호인 |
| 1999-12 | Rheological behaviors of the hypoeutectic A357 Al alloy : Pseudoplasticity | 고영진; 윤의박; 이재철; 이호인 |
| 1999-12 | Rheological behaviors of the hypoeutectic A357 Al alloy : Thixotropy | 고영진; 이호인; 이재철 |
| - | Role of Mg for improving mechanical properties (strength and ductility) in Al-Mg alloys | 이병현; 김성훈; 박준형; Won, Sung Ok; Ahn, Jae Pyoung; 김형욱; 이재철 |
| - | Role of phase separation on the plasticity enhancement of high-strength Fe-based amorphous alloys | 이광복; Kwon, Oh Jib; Eric Fleury; 위상호; 이재철 |
| 1998-01 | Role of the body mount on the passenger compartment response of a frame/body structured vehicle in frontal crash | 이재철; P. Michael Miller II; R. Krishna Murthy; James Cheng |
| - | Shear localization and the plasticity of bulk amorphous alloys | Park Kyoung Won; 이창면; 이재철; 이병주; Yoji Shibutani; Michael L. Falk |
| 1997-01 | SiC/Al 복합재료에서 Al4C3 생성 방지를 위한 평형 Si의 분석 | 이재철; 변지영; 박성배; 이호인 |
| 2001-03 | Straining hardening of the Al alloy sheet during cold rolling and equal channel angular pressing | 이재철; 석현광; 정영훈; 이호인 |
| - | Strengthening and Plastic Deformation in Al-xMg Alloys | 이병현; 김성훈; Won, Sung Ok; 박준형; 김형옥; Ahn, Jae Pyoung; 이재철 |
| 2000-11 | The splat boundary coalescence fraction of electric arc spray formed low carbon steel (Fe-0.06%C steel) | 석현광; P.S. Grant; 이재철; 이호인 |
| 2009-09-22 | 고융점원소를 포함하는 구리계 비정질기지 복합재 및 그 제조 방법 | 김유찬; 에릭플러리; 김도향; 이재철 |
