Exploration of surface properties of Sb-promoted copper vanadate catalysts for selective catalytic reduction of NOx by NH3

Authors
Kim, JongsikKwon, Dong WookLee, SominHa, Heon Phil
Issue Date
2018-11-15
Publisher
ELSEVIER SCIENCE BV
Citation
APPLIED CATALYSIS B-ENVIRONMENTAL, v.236, pp.314 - 325
Abstract
A way to fulfill efficient exploitation of desired catalytic nature provided by V oxide is to modify its chemical structure through the incorporation of secondary transition metal species. This paper reports the use of Cu as a modifier of high-valent V oxide (V2O5) to produce a class of copper vanadates and their utilization as active sites for the selective catalytic reduction of NOx (X = 1 or 2) by NH3 (NH3-SCR). All catalysts contained similar to 2 nm-sized copper vanadate particles highly dispersed on anatase with desired vanadate phases. The anatase-supported Cu5V2O10 provided a greater quantity of acid sites with improved redox character than Cu1V2O6, Cu2V2O7, and Cu3V2O8, thereby exhibiting the greatest NH3-SCR performance under ideal reaction conditions. Anatase-supported Cu3V2O8, however, was found to possess the most preferred surface properties among the catalysts post sulfation. This was evidenced by NH3-SCR runs of the catalysts under reaction conditions with H2O and SO2-including stream, where all catalysts were pre-sulfated by SO2 and O-2 at elevated temperatures. The NH3-SCR performance of the optimum Cu3V2O8 on anatase was further promoted after sulfation of the catalyst with the optimum content of Sb promoter. The Sb promoter was verified to enhance the redox feature and minimize the interactions among catalyst surfaces and SO2/ammonium (bi)sulfates during the NH3-SCR, as evidenced by durability experiments. While showing N-2 selectivities as similar to 100% at <= 400 degrees C, the optimized Sb-promoted Cu3V2O8 on anatase showed high NOx conversions (>= similar to 85%) at >= 220 degrees C and outperformed the control vanadia-tungstate on anatase, which was used to simulate a commercial catalyst. This paper remarks the exploration of the variable structures of metal vanadates can be a good strategy to discover high-performance catalytic solids for the reduction of NOx species.
Keywords
VANADIUM-OXIDE CATALYSTS; LOW-TEMPERATURE SCR; AMMONIUM BISULFATE FORMATION; NITRIC-OXIDE; EFFICIENT CATALYST; SO3 DECOMPOSITION; REACTION PATHWAYS; PARTIAL OXIDATION; ANODE MATERIAL; KINETICS; VANADIUM-OXIDE CATALYSTS; LOW-TEMPERATURE SCR; AMMONIUM BISULFATE FORMATION; NITRIC-OXIDE; EFFICIENT CATALYST; SO3 DECOMPOSITION; REACTION PATHWAYS; PARTIAL OXIDATION; ANODE MATERIAL; KINETICS; Vanadium oxide; Copper vanadate; Antimony; Selective catalytic reduction of NOx; NH3
ISSN
0926-3373
URI
https://pubs.kist.re.kr/handle/201004/120678
DOI
10.1016/j.apcatb.2018.05.024
Appears in Collections:
KIST Article > 2018
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE