Gadolinium-doped ceria nanopowders synthesized by urea-based homogeneous co-precipitation (UBHP)

Authors
Accardo, G.Spiridigliozzi, L.Cioffi, R.Ferone, C.Di Bartolomeo, E.Yoon, Sung PilDell'Agli, G.
Issue Date
2017-02-01
Publisher
ELSEVIER SCIENCE SA
Citation
MATERIALS CHEMISTRY AND PHYSICS, v.187, pp.149 - 155
Abstract
Gadolinium (10%)-doped ceria was successfully synthesized by using an urea-based co-precipitation method (UBHP). A single fluorite phase was obtained after a low temperature (400 degrees C) calcination treatment. The resulting powders showed grains of nanometric size with some agglomerations and an overall good sinterability. Pellets were sintered at 1300 and 1500 degrees C for 3 h. The ionic conductivity was measured by electrochemical impedance spectroscopy measurements and a correlation between electrical properties and microstructure was revealed. The promising conductivity values showed that the synthesized powders are suitable for intermediate temperature solid oxide fuel cells (IT-SOFCs) applications. (C) 2016 Elsevier B.V. All rights reserved.
Keywords
OXIDE FUEL-CELL; ELECTROCHEMICAL PROPERTIES; SINTERING BEHAVIOR; PRECIPITATION; CONDUCTIVITY; ZIRCONIA; POWDER; ANODE; OXIDE FUEL-CELL; ELECTROCHEMICAL PROPERTIES; SINTERING BEHAVIOR; PRECIPITATION; CONDUCTIVITY; ZIRCONIA; POWDER; ANODE; Urea-based homogeneous co-precipitation; Nanopodwers; Gadolinium doped ceria; Electrolytes; Solid oxide fuel cell
ISSN
0254-0584
URI
https://pubs.kist.re.kr/handle/201004/123082
DOI
10.1016/j.matchemphys.2016.11.060
Appears in Collections:
KIST Article > 2017
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE